+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Some more Christmas ornaments. (/showthread.php?tid=6572514)
Re: Some more Christmas ornaments. - Steve K - 11-21-2013
craneman54 said:
I should have asked the first time,but what size are the ones you use?
I think it's These
I should also add I said the ones were nickel plated, they're zinc plated.
Re: Some more Christmas ornaments. - craneman54 - 11-21-2013
OK thanks for the info.
Again great work on your ornaments.
Re: Some more Christmas ornaments. - Wipedout - 09-26-2014
bump for the upcoming holiday season
Re: Some more Christmas ornaments. - MichaelMouse - 09-26-2014
Try a more delicate method of hanging, using cotter pins. Bore, glue, hang. Silver or brass color, your choice.
Re: Some more Christmas ornaments. - Martin S. - 09-24-2015
Bump
Re: Some more Christmas ornaments. - AHill - 09-24-2015
Beautiful work. The bell is just awesome. When you hollow them out, do you use a hollowing tool or do you just drill out a portion?
Re: Some more Christmas ornaments. - Steve K - 09-24-2015
AHill said:
Beautiful work. The bell is just awesome. When you hollow them out, do you use a hollowing tool or do you just drill out a portion?
Thanks Alan
On those I just used a spindle gouge like you would for end grain hollowing. They are not very big or deep so that works well. I did not pre drill them although that would work too.
Re: Some more Christmas ornaments. - Arlin Eastman - 09-24-2015
You know I was surprised I had this as a favorite but never put a remark on it.
Guess I was to excited to do the first part first.
Anyway I always liked them and still have the ones you made.
Arlin
RE: Some more Christmas ornaments. - Arlin Eastman - 08-04-2016
Bump for those who wish to make them and do not know what to do with their left over plywood
RE: Some more Christmas ornaments. - AHill - 08-04-2016
There is no need to bump anymore, as threads never expire. Unless you just want to push it to the top of the reading list again.