+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Textured Cherry platter/bowl (/showthread.php?tid=6868684)
Pages:
1
2
Re: Textured Cherry platter/bowl - tim t - 11-02-2014
I used a point tool and the sorby micro texture tool. The section on the front was done with the head tilted about 45 degrees to the right, speed lowered to about 400rpm. This the same as the back. The bottom center was the same and the next section was moved to 45 degrees left of center. The third section was at 90 degrees (vertical). Really enjoying playing with it. I like to separate the sections with duel cuts from the point tool.
Re: Textured Cherry platter/bowl - Dennis Puskar - 11-02-2014
Very nice work.
Re: Textured Cherry platter/bowl - Arlin Eastman - 11-02-2014
Tim
That is a wonderful piece.
Also a great piece of wood. I love cherry and can not get enough of it for the reason you have shown.
Arlin
Re: Textured Cherry platter/bowl - Nature Man - 11-06-2014
Thanks for sharing the process. I'm not familiar with these tools, so is helpful to learn how you were able to make these designs.
Re: Textured Cherry platter/bowl - GNP - 11-06-2014
Wow
Re: Textured Cherry platter/bowl - Jim Pilsner - 11-06-2014
That came out really well. Thank you for sharing.
Re: Textured Cherry platter/bowl - Martin S. - 10-29-2015
Bump for an excellent platter.