+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Need Sharpening Advice for Spokeshave... (/showthread.php?tid=6892120)
Need Sharpening Advice for Spokeshave... - Israel - 11-30-2014
Hello,
Anybody use the Vertitas MKII sharpening system on spokeshave blades? If so, what settings did you use?
Thanks!
Re: Need Sharpening Advice for Spokeshave... - cputnam - 11-30-2014
I hone mine at 30° - if that's what you are asking.
Re: Need Sharpening Advice for Spokeshave... - DaveParkis - 11-30-2014
Veritas has an attachment for the MK II for spokeshave irons. I suspect you'll need that.
Re: Need Sharpening Advice for Spokeshave... - Steve Friedman - 11-30-2014
DaveParkis said:
Veritas has an attachment for the MK II for spokeshave irons. I suspect you'll need that.
Yup. The small blade attachment, but it's not my favorite way of doing it because I find the blade shifts too easily. You could make your own short blade holder, but an easy way is secure the spokeshave blade to a full sized plane blade with 2 or 3 rare earth magnets (or double sided turner's tape). I've used that with all different kinds of honing guides and it works. Not as good as if someone would come up with a honing guide that will handle short blades, but until then . . .
Steve
Re: Need Sharpening Advice for Spokeshave... - bridger - 11-30-2014
If the jig doesn't offer a distinct advantage in speed, accuracy and simplicity over freehand honing then don't punish yourself with it. Learn to freehand hone. Free your hones and your butt will follow.....
Re: Need Sharpening Advice for Spokeshave... - Israel - 11-30-2014
Thanks--I will get the small blade attachment from LV...
Re: Need Sharpening Advice for Spokeshave... - Rob Young - 12-01-2014
bridger said:
If the jig doesn't offer a distinct advantage in speed, accuracy and simplicity over freehand honing then don't punish yourself with it. Learn to freehand hone. Free your hones and your butt will follow.....
+1
Re: Need Sharpening Advice for Spokeshave... - Martin S. - 12-01-2014
I've done it freehand and with the small blade attachment.
I prefer the attachment.
Re: Need Sharpening Advice for Spokeshave... - Window Guy - 12-01-2014
Have you seen the one Paul Sellers made, it is pretty slick and made from scrap wood and some brass screws.
Steve
Re: Need Sharpening Advice for Spokeshave... - Martin S. - 11-18-2015
Window Guy said:
Have you seen the one Paul Sellers made, it is pretty slick and made from scrap wood and some brass screws.
Steve
No, I need to find this.