+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Interesting way to set up the TS to cut angle and taper (/showthread.php?tid=7059184)
Interesting way to set up the TS to cut angle and taper - Cecil - 07-20-2015
I found a video on the internet which shows an interesting way to set up the TS to cut both an angle and taper. The video is an hour long, so skip to 55:06 to see the saw setup for making a multi sided, tapered box.
Making 6 sided tapered wood vessel
Re: Interesting way to set up the TS to cut angle and taper - Steve N - 07-20-2015
TS is centerpiece of a shop for that type of ability. You tube is rapidly becoming the school to teach you how best to use it.
Re: Interesting way to set up the TS to cut angle and taper - bennybmn - 07-21-2015
It's like Bob Ross with a bad voice over. Love it. Great, simple explanation of cutting compound angles!
Re: Interesting way to set up the TS to cut angle and taper - AHill - 07-21-2015
Brilliant! I also like that he keeps his safety devices intact and uses push sticks, etc.