Woodnet Forums
heavy scissors - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: heavy scissors (/showthread.php?tid=7075759)



heavy scissors - DaveLeard - 08-15-2015

anybody recognize this pair of scissors as belonging to a particular trade?




Re: heavy scissors - AHill - 08-15-2015

Looks like a pair of leather shears to me. Often, one blade is serrated.


Re: heavy scissors - iclark - 08-15-2015

Just a guess, but it looks appropriate for upholstery or cutting fiberglass mat or cloth.


Re: heavy scissors - Herb G - 08-15-2015

Leather work, or sail maker's scissors.


Re: heavy scissors - Timberwolf - 08-15-2015

I can't be sure but it's possible the blades have been shortened..I don't know of a trade that uses scissors like that.


Re: heavy scissors - AHill - 08-15-2015

Timberwolf said:


I can't be sure but it's possible the blades have been shortened..I don't know of a trade that uses scissors like that.




It's possible they were ground short by the user, but they look very similar to this current offering by Solingen. Marketed as leather and upholstery shears. Most modern version have the snub nose for the upper blade and a pointed nose for the lower blade. The one the OP posted has both upper and lower blades snub.

From Solingen. Textilia leather and upholstery shears:



Re: heavy scissors - Timberwolf - 08-16-2015

If they were shortened by the owner, the lines left by the grinder "may" be visible at the end of each blade, and that would indicate whether or not they were manufactured the way they are now. The "three finger" grip and the strong hinge joint would indicate they were made for cutting heavy material like leather, fabric etc...Lots of cutlery manufacturers have been based in Solingen for centuries, as you probably know..


Re: heavy scissors - Guest - 08-16-2015

Dave, I'm almost certain that your shears are a cut-down pair of heavy scissors. In a former life, I worked in a garment manufacturing plant. The [fabric] cutting department used scissors with the exact handles and hinge yours has, except they were about 12 or 14 inches long. Moreover, the tips of most shears and scissors meet at the point rather than crossing as yours do. The fact that yours cross indicates to me that the blades have been substantially shortened. Nevertheless, I'll bet you have a very stout and powerful pair of shears.
My $.02,

Hank


Re: heavy scissors - Steve N - 08-16-2015

If not this exact model, it was for this purpose Heavy Duty Tailor's Scissors.


Re: heavy scissors - GNP - 08-16-2015

Steve N said:


If not this exact model, it was for this purpose Heavy Duty Tailor's Scissors.



I have 2 pr of those, I used as a carpet installer.