+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Craftsman 6-inch Jointer pulleys (/showthread.php?tid=7085188)
Craftsman 6-inch Jointer pulleys - petertay15 - 08-29-2015
I've got the old Craftsman jointer model 113-328000
The manual indicates that the pulley on the spindle is 2-inch, but doesn't state what size the motor pulley is. Does anyone know if should be 2 inches or was it 2.5 inches.
Thanks. -- Peter
Re: Craftsman 6-inch Jointer pulleys - Mac1 - 08-29-2015
It depends on the RPM of the motor. 1725 RPM will require something about 4 to 5 inches.
3600 RPM can use 2 or 2 1/2.
Re: Craftsman 6-inch Jointer pulleys - JGrout - 08-29-2015
I agree with Mac the jointer head should turn ~ 4000 rpm so it is likely 2 1/2" for a 3450 rpm motor
1725 is between 5-5 3/4"
Joe
Re: Craftsman 6-inch Jointer pulleys - alnandy - 08-29-2015
I agree with Joe about 4000 rpm. It'd give a nicer cut at 5000 rpm, but I wouldn't trust the gibbs on a Craftsman at that speed. I had an old 6" that threw off some knives at 5000 rpm. Scary