+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: CA glue question (/showthread.php?tid=7093545)
CA glue question - Angus - 09-09-2015
Sorry folks, I know it's been asked before but I lost a lot of my bookmarks. What's the preferred source for CA glue?
Re: CA glue question - Steve K - 09-09-2015
I use starbond. The biggest reason is our club orders it a couple times a year and we order enough it ships free. Still, even with shipping it's a good product and reasonably priced. They also have a big selection in viscosity and color choices.
Re: CA glue question - Arlin Eastman - 09-09-2015
Yep Steve has it right and it only cost $30 for a 16oz bottle and they send you 4 smaller bottles to fill and the thin drip nozzles too.
http://www.starbond.com/
You have to call to order since they do not sell it on their site.
Good to hear from you again my friend.
Arlin
Re: CA glue question - Angus - 09-09-2015
Thanks guys, I hadn't considered it before but that black CA is going to make my life a whole lot easier
Re: CA glue question - Woodshop - 09-10-2015
I still use the E-Z Bond Wooden wonders sold. You can still get it here.
http://www.exoticblanks.com/Glues-and-Epoxies/
I don't use much CA, A bottle will last me years. I keep it in the refrigerator.
will try the Starbond when my bottle runs out
Re: CA glue question - Arlin Eastman - 09-10-2015
Angus
I think including Black they have pink and 2 other colors. I also wanted to get black so it will show in-between the cracks or I should say the seams.
I think it would really highlight the wood like that.
Arlin
Re: CA glue question - Angus - 09-10-2015
be prepared Arlin, the black is double the cost of clear. A 16 oz bottle of black is $60.00
Re: CA glue question - Dusty Workshop - 09-10-2015
Woodshop said:
I still use the E-Z Bond Wooden wonders sold. You can still get it here.
http://www.exoticblanks.com/Glues-and-Epoxies/
I don't use much CA, A bottle will last me years. I keep it in the refrigerator.
will try the Starbond when my bottle runs out
I door see this product on that website?
I searched "ez bond" and it only found CA products.
Re: CA glue question - Arlin Eastman - 09-10-2015
Yah
I forgot about that but it is still cheaper then by the 2 or 3 oz bottles from others.
I would use Medium CA clue and add black India ink to change it instead.
Arlin
Re: CA glue question - Arlin Eastman - 09-10-2015
Don
The company you mentioned there thin CA viscosity is only at 50 cps but Starbond is 2 or 3 cps which is soooo much better at penetrating especially if you use inlayed metals or other things.
http://www.exoticblanks.com/E-Z-Bond-16-oz.-Thin-CA-50-CPS-Orange-Label.html
To this
http://www.starbond.com/
Plus it comes with 4 small plastic bottles with lids and the small flexible tips that allow very good delivery
Arlin