+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Really? Outfeed table height on 19-38 SuperMax (/showthread.php?tid=7095049)
Really? Outfeed table height on 19-38 SuperMax - glzahn - 09-11-2015
I'm in the process of building another workbench for my shop and I'd like to use it as an outfeed table for a SuperMax 19-38 drum sander(future purchase).
I called them and asked for the height of the conveyor belt/outfeed table from the floor with casters and the lady said, "It's 47" to the top of the dust cover." I said, "No I need to know the height of the conveyor belt/ outfeed table."....now on hold. "The height to the bottom of the conveyor belt is 33"." I said, "no I need to know the height to the top of the conveyor belt. The wood comes out on top." She said, "It's just a few inches higher." I said, "What are a few inches."....on hold again. "The top of the conveyor belt is 36" from the floor."
Not that I don't trust her expertise, but could anybody confirm her measuring prowess.
Thanks,
Re: Really? Outfeed table height on 19-38 SuperMax - MSRiverdog - 09-11-2015
My 16/32 is at 34 1/4, my Uni is at 34 7/8 for what it's worth.
Re: Really? Outfeed table height on 19-38 SuperMax - glzahn - 09-11-2015
Are you related to the gal at SuperMax?
Re: Really? Outfeed table height on 19-38 SuperMax - closed for business - 09-11-2015
my sawstop is at 36.5" HTH
you can always add height by adding a spacer to the future purchase. Or it might change dimensions.. build your table at a comfortable height and then adjust future machines to fall within that height.
Re: Really? Outfeed table height on 19-38 SuperMax - MSRiverdog - 09-11-2015
glzahn said:
Are you related to the gal at SuperMax?
They let you out of the basement and yer on a roll!
Re: Really? Outfeed table height on 19-38 SuperMax - AdamR - 09-11-2015
My 19-38 outfeed table height is at 35 1/2 inches using the 3" Woodcraft locking swivel casters (#148595). It appears to have about a half inch plus or minus of adjustment with the casters.
Re: Really? Outfeed table height on 19-38 SuperMax - Bill_de - 09-12-2015
AdamR said:
My 19-38 outfeed table height is at 35 1/2 inches using the 3" Woodcraft locking swivel casters (#148595). It appears to have about a half inch plus or minus of adjustment with the casters.
You must have read the question!
Re: Really? Outfeed table height on 19-38 SuperMax - JGrout - 09-12-2015
it is surprising how that happens at least on occasion
Joe