A Simple Bench Design - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: A Simple Bench Design (/showthread.php?tid=7101124) |
A Simple Bench Design - DaveR1 - 09-19-2015 A bench I drew up for practice. Seems like an easy enough project. It could make a nice hallway bench or even something for outdoors. The original was designed and built in Mexico. Re: A Simple Bench Design - bgeva - 09-19-2015 I wouLd probably use a mortise and tenon to connect front legs to the back ones (kind of like a T). But otherwise it is a practical bench. Thanks, BG Re: A Simple Bench Design - DaveR1 - 09-19-2015 I don't know. I think the front legs add some stiffness to the back rest by preventing it from pivoting. Re: A Simple Bench Design - bgeva - 09-20-2015 From the first glance I thought the rest is half-lapped, but now I see your point. Even better - half lap the rest and tenon in the front. Look mom - no screws!! BG Re: A Simple Bench Design - DaveR1 - 09-20-2015 Yeah, ya could do that. It would be different from the original design. I expect the designer chose this method of construction because it would be relatively fast and forgiving to assemble. Especially since quite a few of these were made for the school in which they were used. Re: A Simple Bench Design - bgeva - 09-21-2015 True - it all depends on who, how many and how cheap... BG |