+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: How to cap off unused chimney flue (/showthread.php?tid=7104445)
How to cap off unused chimney flue - shoottmx - 09-24-2015
We have a fireplace in our family room that we never use--I know--one of my hobbies is creating high cost firewood but I give that to another high cost firewood producer to burn in his wood stove.
To the issue. During certain temp/humidity conditions we get a downdraft that stinks like a used chimney, sometimes it's really miserable. We also get the smell when the house is closed up and we run the clothes dryer. Can we just cap off the top of the flue? The chimney was cleaned after we last used the fireplace .
Thanks guys,
g
Re: How to cap off unused chimney flue - Pirate - 09-24-2015
Cap top or bottom. Just be sure the fireplace is the only thing that uses the flue!
Family room. Fireplace. Blocking flue. Just doesn't sound right to me!
I'm now living in FL and miss having a working fireplace.
Re: How to cap off unused chimney flue - vernonator - 09-24-2015
cut a piece of 2" foam insulation to fit the flue at the bottom, wedge it up there and use spray foam to seal the edges. Air tight and insulated and not permanent.
Re: How to cap off unused chimney flue - ridgeline - 09-24-2015
I closed my chimney off with a stainless cap that included a damper similar to this combo cap damper
This stops the drafts but is not permanent should you change your mind or plan to sell your house at some point.
Re: How to cap off unused chimney flue - shoottmx - 09-24-2015
vernonator said:
cut a piece of 2" foam insulation to fit the flue at the bottom, wedge it up there and use spray foam to seal the edges. Air tight and insulated and not permanent.
This is looks like the best option for me!! Thanks vernonator and everyone else who replied.
g
Re: How to cap off unused chimney flue - arthropod98 - 09-28-2015
shoottmx said:
[blockquote]vernonator said:
cut a piece of 2" foam insulation to fit the flue at the bottom, wedge it up there and use spray foam to seal the edges. Air tight and insulated and not permanent.
This is looks like the best option for me!! Thanks vernonator and everyone else who replied.
g
[/blockquote]
i think i'd still wanna seal at the top . . . JMHO. i'm just picturing water building up or something getting down in there.
Re: How to cap off unused chimney flue - Snipe Hunter - 09-29-2015
I sure wouldn't put spray foam in a flue. It's probably a good way to start a chimney fire for the next owner. It will be a bugger to get out if you ever have to sell the house.
I'd probably cap the top with aluminum foil and put a rain cap over it to hold it in place. I certainly wouldn't stick something flammable in it.
Re: How to cap off unused chimney flue - EatenByLimestone - 09-29-2015
There are dampers that can be installed at the top which will keep rain out, yet are openable should you want to use the flue.
Re: How to cap off unused chimney flue - EricU - 09-30-2015
Snipe Hunter said:good point about messing up the flue. I made some sheet metal caps for mine, and they blew off. Really frustrating. I think that means there is a pretty big force from underneath helping to lift them. So you should probably add something at the bottom that is easy to remove.
I sure wouldn't put spray foam in a flue. It's probably a good way to start a chimney fire for the next owner. It will be a bugger to get out if you ever have to sell the house.
I'd probably cap the top with aluminum foil and put a rain cap over it to hold it in place. I certainly wouldn't stick something flammable in it.
Re: How to cap off unused chimney flue - EatenByLimestone - 09-30-2015
Draft is the force and it runs off the difference in temperature between inside and outside. There are balloons you can buy that fit. In the chimneys too.