+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Replace Door Window FRAME only (/showthread.php?tid=7111261)
Pages:
1
2
Replace Door Window FRAME only - DogwoodTales - 10-03-2015
So the frame to my back door window is cracked and needs to be replaced.
I do not need a new door, nor a window. I just need a new frame for the window.
A Google search results in multiple useless leads.
Where can I get a new frame for this window?
Re: Replace Door Window FRAME only - KC - 10-03-2015
If you can find the manufacturer of the door they may be able to help.
Re: Replace Door Window FRAME only - JGrout - 10-03-2015
take your pic and accurate measurements of the window to any reputable lumberyard they can set you up with a new unit and the frame
Sadly you are not going to have much luck getting the frame without the IG unit AFAIK this is the only option
Joe
Re: Replace Door Window FRAME only - Robert Adams - 10-03-2015
The frame is part of the window. Those units usually run around $70. Measure it pick up a new one and swap it out. It's all glued together.
Re: Replace Door Window FRAME only - DogwoodTales - 10-03-2015
Actually, the two halves of this frame are screwed together.
I was hoping to find an on-line source, but I guess I'll take my chances at the box stores n such.
Thanks
Re: Replace Door Window FRAME only - clockman - 10-03-2015
epoxy it together?
Re: Replace Door Window FRAME only - EdL - 10-03-2015
Go to a door shop.....IIRC the window sizes are somewhat standard.
Ed
Re: Replace Door Window FRAME only - JGrout - 10-03-2015
Quote:
I guess I'll take my chances at the box stores n such
\you might note I mentioned a reputable lumberyard
I would not waste one second of time at a borg
Re: Replace Door Window FRAME only - DogwoodTales - 10-04-2015
point taken - insofar as lumber yards go in the Cincinnati that may be Hyde Park Lumber over the box stores.
Re: Replace Door Window FRAME only - theeviltwinn - 10-04-2015
A window frame like that would make a nice wood working project.
Twinn