+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Looking for some hardware, table/stool legs (/showthread.php?tid=7128996)
Looking for some hardware, table/stool legs - bennybmn - 10-27-2015
So last year I made a couple of small step stools for my niece and nephew. I used a table leg top plate like this:
Linky link
These were definitely overkill, and demanded a bit more inboard offset than I wanted, but it worked. Later, when I visited the fam, I noticed my other nephew's stool (store bought) had similar hardware, but on a much smaller scale, still plenty stiff, but it allowed for mounting closer to the edge of the stool. I'd like to find those brackets, since it would make for a much more stable stool! Anyone have any ideas?
I've googled table leg top plate, angled top plate, stool leg top plate... Any other ideas? Thanks all!
Re: Looking for some hardware, table/stool legs - Allen - 10-27-2015
Check with Rockler http://www.rockler.com/search/go?w=table%20leg%20hardware and Lee Valley http://www.leevalley.com/en/hardware/page.aspx?p=41854&cat=3,43586,43590
Google has several places https://www.google.com/?gws_rd=ssl#q=screw+on+leg+plates
Re: Looking for some hardware, table/stool legs - bennybmn - 10-29-2015
Thanks Allen. Most of the ones I've seen doing a google search are the larger size. I can't figure out a good search term to find the smaller ones... The 4 pack from Lee Valley seems like a nice low-cost option to at least try and see if I can get them closer to the corner. I'll keep lookin!!