+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: end grain cutting board (/showthread.php?tid=7136121)
end grain cutting board - northman - 11-04-2015
I would like to use my scrap birch and alder wood to make some end grain cutting boards. I can not find anything about the use of alder wood in the making of the cutting boards. Is it good and safe to use this wood?
Re: end grain cutting board - JGrout - 11-04-2015
Alder is safe enough to use
It is not terribly hard however certainly not as hard as your birch.
If they are more decorative or for bread I would say it is fine.
For a meat butcher I would pass
Re: end grain cutting board - Bill Holt - 11-05-2015
Welcome aboard "northman", it is a great place to hang out and learn.
Re: end grain cutting board - northman - 11-05-2015
Thanks for the information. Oak and birch will have to do.
Re: end grain cutting board - KyleD - 11-06-2015
Nice to see a new poster.
Just how far north are you, man.
Re: end grain cutting board - MichaelMouse - 11-06-2015
JGrout said:
Alder is safe enough to use
It is not terribly hard however certainly not as hard as your birch.
If they are more decorative or for bread I would say it is fine.
For a meat butcher I would pass
White birch would be about an even match for red alder in a board. Not for chopping, as mentioned, but perfectly useful as a bread/cutting board. Make two distinctive patterns, one for foods to be eaten fresh - veggies, one for food eaten cooked - meats. Grain on both woods close enough to slow penetration of blood and such, but wipe with bleach solution between uses good idea.
Re: end grain cutting board - jteneyck - 11-06-2015
northman said:
Thanks for the information. Oak and birch will have to do.
Cutting boards that are intended to get used to cut meat are made from closed pore woods. Birch would be a good choice, but not oak, especially if it's red oak. Traditional woods would include, maple, beech, cherry, etc. As mentioned, however, if the intended use is for bread or other dry products, you could use any wood that appeals to you.
John
Re: end grain cutting board - northman - 11-06-2015
North of the 54.
West/central Saskatchewan.
Re: end grain cutting board - northman - 11-06-2015
Nice to get good information on the different kinds of wood.
Thanks.
Re: end grain cutting board - bennybmn - 11-09-2015
Maple, cherry, and walnut make for some nice color contrasts too!