+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Where Can I buy Spindle Adapter (/showthread.php?tid=7151867)
Where Can I buy Spindle Adapter - Doug_H - 11-24-2015
Hello, All
Do you know where I can buy a spindle adapter from male 3/4"-16 LH thread to male 1 x8 RH thread. Seems like lots of turners might like to mount something outboard on a headstock spindle. But so far no luck searching the internet.
I had the same need a few years ago with similar lack of results so I tapped a LH thread into a RH thread 3/4-16 spindle adapter. So, it was double threaded. It worked fine.
That adapter is long gone so I tried to repeat my performance. This effort was not successful. (Actually the threaded hole is great, it just isn't concentric with the 1 x 8 side. ) This time my $17 PSI adapter went into the trash. I can keep trying at $17 a pop until I get it right or maybe I could find out where to buy one.
Again, Happy Thanksgiving if we don't communicate again before then
Doug
Re: Where Can I buy Spindle Adapter - Shop Dad - 11-24-2015
Hey Doug,
Try http://bestwoodtools.com they make adapters and can do custom work. Give them a call to specify your needs.
Another Doug
Re: Where Can I buy Spindle Adapter - Doug_H - 11-24-2015
Doug,
Thanks. I sent them an email
Doug
Re: Where Can I buy Spindle Adapter - MKepke - 12-02-2015
You might try looking for a "thread reducer" at an industrial supply house, but you have an odd thread size.
Maybe you can get two appropriately sized nuts and weld them together. Concentricity might be pretty good if they can be clamped in the headstock and tailstock during tack welding.
-Mark
Re: Where Can I buy Spindle Adapter - Arlin Eastman - 12-02-2015
Doug
Here you go
https://www.pennstateind.com/store/LA3418.html
Arlin
Re: Where Can I buy Spindle Adapter - Doug_H - 12-03-2015
Thanks to all.
Still looking. Steelex/Grizzly has a 3/4-16 LH thread fitting that I can bolt stuff onto. It may be my best choice.
Doug
Re: Where Can I buy Spindle Adapter - MichaelMouse - 12-03-2015
Out of curiosity, if you need a LH thread to fit the spindle, you do know that a RH attachment will unwind unless you lock it somehow?
Re: Where Can I buy Spindle Adapter - AHill - 12-03-2015
Best Wood Tools makes great stuff, from what what I hear. I ordered a pin chuck a month ago and have yet to receive it. Call first to find out availability and/or get an estimate on when it'll ship.
Re: Where Can I buy Spindle Adapter - Arlin Eastman - 12-03-2015
Doug
I do not understand I gave you a post for one?
Arlin
Re: Where Can I buy Spindle Adapter - SceneryMaker - 12-03-2015
It looks like the 3/4-16 thread in the one you found was a right-hand thread.