+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Router Bit Set for Making Windows (/showthread.php?tid=7168025)
Router Bit Set for Making Windows - Woodrat - 12-14-2015
I was asked to assist in building some single-pane glass windows. Does anyone have a recommendation for a router bit set with which they have had good success? At this point, I am just looking for a set which produces good results. The specific profile will be provided to me later.
Thanks.
Re: Router Bit Set for Making Windows - JGrout - 12-14-2015
glazed units or sticking applied?
this set is pretty standard for sashes
Re: Router Bit Set for Making Windows - Brian in sunny FL - 12-14-2015
I have a dimensional drawing in the secondary images if you need it.
http://www.holbren.com/window-sash-route...-shank-2-flute/
Re: Router Bit Set for Making Windows - Woodrat - 12-15-2015
Thank you for the replies and the suggestions. I think that it is sticking applied, but I am not sure (one of the downsides of having the equipment but not the project).
I have seen the Whiteside bits before. Does anyone have experience with the Freud sets?
Thanks.
Re: Router Bit Set for Making Windows - Woodrat - 12-15-2015
Like I said--when you aren't the one with the idea . . . It turns out they are glazed windows.
Thanks.
Re: Router Bit Set for Making Windows - Scoony - 12-15-2015
I have the set from Infinity. Has the same profile as the Holbrens I made windows for my shed and they worked great. There is a PDF out there on one of the router bit sites that explains how to make them. I ended up making a story stick as my math was not coming out right for the size.
Re: Router Bit Set for Making Windows - JGrout - 12-16-2015
Woodrat said:I am of the opinion that if the seller is reputable ( as Brian is) then the brand really makes no difference.
Thank you for the replies and the suggestions. I think that it is sticking applied, but I am not sure (one of the downsides of having the equipment but not the project).
I have seen the Whiteside bits before. Does anyone have experience with the Freud sets?
Thanks.
One more thing on the glazing: that does not mean the Glazing is applied to both sides one ise has a stop shoulder Like the ones we have shown and the other side is glazed using putty. The other option is loose profiled sticking applied after the glass is installed that can be removed.
the difference generally it the rabbet should be deeper for wooden sticking otherwise the profile ( even square) would protrude.
there has to be a logical way to remove a broken pane of glass, and either will work fine, the setup is the and the material used are the only differences
Re: Router Bit Set for Making Windows - Woodrat - 12-16-2015
Thanks to everyone who responded. I placed an order with Brian's company for the bit he specified. I can't wait to start making the windows.
Re: Router Bit Set for Making Windows - Bob Vaughan - 12-17-2015
late to this party, but...
This set allows the full length tenon that's often so crucial for good sash construction. This is a newer set. Andrew showed me this set a few months ago and I was impressed.
https://www.youtube.com/watch?v=WN2rK5VaqFY