+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Ray Key finishing (/showthread.php?tid=7168504)
Ray Key finishing - Captain Pete - 12-15-2015
I've been watching the Ray Key box videos and his technique for finishing boxes. He sands with silicon carbide paper lubricated with "a soft paste wax." He uses that same wax with steel wool to cut back his lacquer finish before applying a final coat of BriWax or lacquer. If you've seen his demo or taken his classes, what product is the "soft paste wax" he uses as a lubricant? It appears to be white and opaque, and very soft.
Re: Ray Key finishing - Brian Myers - 12-15-2015
From 2010 when someone asked the same question on
WoodCentral
Re: Ray Key finishing - Captain Pete - 12-15-2015
What a memory! Thanks.
Re: Ray Key finishing - Arlin Eastman - 12-15-2015
I had his DVD and tried how he finishes. I just did not care to much for all the steps and limited to a low sheen that he likes.
I want to be able to make it Matte to high Gloss finish on any piece I want. I can also get a getter sanding job to 1000 or higher that he does not do either.
Of course I love to sand and feel how it gets smoother and smoother.
I suggest you try it and use or do not use as you see fit. Remember there are hundreds of ways to finish wood.
Arlin
Re: Ray Key finishing - Brian Myers - 12-16-2015
Captain Pete said:
What a memory! Thanks.
LoL found it through google not with my memory
Re: Ray Key finishing - EightFingers - 12-16-2015
Arlin Eastman said:
Of course I love to sand
Arlin
