+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Rockwell 37-315 fence support details? (/showthread.php?tid=7195190)
Rockwell 37-315 fence support details? - Wild Turkey - 01-16-2016
Anyone got any pictures of how this goes together? I thought I took some pix but they don't show what I'm looking for.
Re: Rockwell 37-315 fence support details? - bobburk - 01-16-2016
Click on the the following link below, select jointers from the filter drop down and then scroll down till you find 37-315 and down load the manual. There might be manuals specific to the fence alone.
Bob
http://vintagemachinery.org/mfgindex/detail.aspx?id=1141&tab=3
Re: Rockwell 37-315 fence support details? - Brian in sunny FL - 01-17-2016
Does this help at all?
http://www.ereplacementparts.com/images/delta/37-315_Type_1.pdf
Re: Rockwell 37-315 fence support details? - Wild Turkey - 01-17-2016
The OWWM site didn't have a manual by the model number but did for a "long bed 8" jointer" but all it had on the fence was the same drawing that ereplacements uses.
I found a manual online yesterday but when I tried to download it a dozen other programs tried to piggyback along.
I am starting to get it figured out but several missing parts aren't helping
thanks for the help
Re: Rockwell 37-315 fence support details? - Carpenter Mark - 01-17-2016
Vintage Machinery.org (OWWM's sister site) has two 37-315 manuals; the one ereplacements has and this one for older machines-
http://vintagemachinery.org/pubs/1141/3671.pdf
But the fence mount is unchanged from the first to the last- three 5/16"x 1"socket head cap screws with lockwashers bolt the fence support ti the back of the outfeed table,( flush with the top I'm pretty sure)
Re: Rockwell 37-315 fence support details? - Wild Turkey - 01-17-2016
Parts JA-44,45, and 46 seem to be missing, which makes it a problem figuring out how things go together.
Spring SGC-245 seems to be on the wrong end of JA-121 but I think I've got most of the rest figured out.
Going to have to order a couple of parts from ereplacements while I'm waiting on the Byrd head to arrive.
edit to add: JA-44 is not available. Looks like I'm going to have to get creative!
Re: Rockwell 37-315 fence support details? - dejongs - 01-17-2016
I have a 37-315. Let me know what you need photos of.
Re: Rockwell 37-315 fence support details? - Wild Turkey - 01-17-2016
The bottom of the assembly so I can see how the trapezoidal blocks work and what the shaft they mount on looks like.
That should get me to the next level of confusion
many thanks!
Re: Rockwell 37-315 fence support details? - Carpenter Mark - 01-17-2016
Oh-
You need info on the fence base , not the support.
The JA-44 shaft may have (probably has) been used on other machines such as DP's, shaper fences etc.
It's been awahile since I've had mine (37-301)apart, but I think is just a straight 5/16" shaft, external threads on one end, drilled and tapped 1/4-20 on the other. I'll look tomorrow.
Post a Want To Buy on OWWM, probably turn one up.
Re: Rockwell 37-315 fence support details? - Wild Turkey - 01-18-2016
Starting to get it sorted out
ereplacements drawing link
Do the wedges (#28 & 29) clamp on the collars (#26) to lock the fence at an angle?
I've only got one wedge -- wonder if I can make it work
Maybe OWWM parts forum will come through