+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: PC 890 height adjust handle (/showthread.php?tid=7198759)
PC 890 height adjust handle - handi - 01-20-2016
I mounted my PC 890 into my new Kreg router table, but I do not have the height adjust handle that PC used to sell for the 890. Amazon does not have it. Rockler has their own version, but with shipping would be near $30.00 and it has a huge wheel on the end.
Looking at the base of my 890, turns out the pins that the handle engages are Allen wrench shaped. And measure 3/16". Which is the same size used for a 1/4-20 Allen head bolt. So for less than $10.00 and in less than 30 minutes, I had a working height adjuster.
make your own!
(Trying to add a photo, but Photobucket is not cooperating)
Ralph
Re: PC 890 height adjust handle - kurt18947 - 01-20-2016
They're using hex sockets these days? Mine is probably 10+ years old and has a 3/16" hex head. Socket works but I don't have mine under the table so don't really need it.
Re: PC 890 height adjust handle - handi - 01-22-2016
