+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Sorby Eccentric Chuck (/showthread.php?tid=7227810)
Sorby Eccentric Chuck - Jason28 - 02-23-2016
Years ago I acquired a Sorby Eccentric chuck with a 1"x8 tpi insert. I've since upgraded my lathe and now have a 1-1/4"x8 tpi spindle. I cannot for the life of me find a dealer who sells just the inserts for this chuck. I can find adaptors for the Sorby Patriot chucks, but I'm not sure they'll fit the Eccentric. As near as I can tell, the Eccentric chuck has a 1-1/2"x6 tpi thread in the body. Does anyone know what the male thread size of the Patriot insert is?
Re: Sorby Eccentric Chuck - Ruler2112 - 02-23-2016
I can't help with your question as given, but I have used this on a really old nova chuck on which the normal nova insert didn't fit. No runout at all & relatively cheap. Wouldn't be ideal, but would at least allow you to mount/use the chuck.
Re: Sorby Eccentric Chuck - n7bsn - 02-23-2016
Have you checked with Packard? I think they are the only vendor selling that chuck in the USA right now.
Re: Sorby Eccentric Chuck - Arlin Eastman - 02-23-2016
Jason
I got mine from EZ wood tools and it is spot on.
Arlin
Re: Sorby Eccentric Chuck - Jason28 - 02-25-2016
I asked the question of Hartville Tool and they checked with Sorby directly. The inserts for the Patriot chucks also fit the Eccentric chuck, so I'm going to get one from Hartville.
Thanks for all the input. I appreciate it.