Electrical wall plates for 120 & 230 - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Electrical wall plates for 120 & 230 (/showthread.php?tid=7301831) |
Electrical wall plates for 120 & 230 - Mandrake - 06-16-2016 I have a few 2-gang boxes into which I would like to install: one of these: And one of these: But I have not seen a wall plate that accommodates such a configuration. I'm wondering if anyone has, or If I'm looking at buying a few combo plates that are blank on one side and putting them on the drill press. Re: Electrical wall plates for 120 & 230 - Foggy - 06-16-2016 An odd configuration that will be difficult to find. For a few your drill press solution is probably the easiest. Be sure you clamp then down tight. They catch and spin around easily. BTDT Ouch. Re: Electrical wall plates for 120 & 230 - Ohio Mike - 06-16-2016 Here's a link to one on Amazon: Amazon And a link to one by Kyle manufacturing: Kyle If your local big box doesn't have them you can get them at electrical suppliers. If you're using 4 inch square metal boxes in your shop, check out this video: YouTube Mike Re: Electrical wall plates for 120 & 230 - joe1086 - 06-16-2016 I got one a few years back at Home Depot....they were designed for 2 gang boxes and you selected each side separately. They kind sorta clipped together in the middle. Re: Electrical wall plates for 120 & 230 - fredhargis - 06-16-2016 $1.02 and qualifies for Amazon prime! RE: Electrical wall plates for 120 & 230 - norcal01 - 07-24-2016 Not that odd a configuration, but will be hard to find at a big box store I would suggest either online, or a good electrical supply house, for a Hubbell product, the catalog number for a white 2 gang plate for a duplex receptacle, and a single receptacle is NP78W. |