+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Poly ? (/showthread.php?tid=7303108)
Poly ? - AgGEM - 06-18-2016
2 x 5 x 3/4 pine slab with Latex paint. Many parallel kerf cuts on the underside to relieve cupping.
Screws down to a flat sub - top.
Think desk top.
Question is - do I wait to screw this down flat before I clear coat it with Poly or......
Can I poly it in the shop
and then screw it down flat on the job site?Ag
Re: Poly ? - jteneyck - 06-18-2016
I don't think it matters. Just make sure you allow it to expand contract by using slotted screw holes when you screw it down. Otherwise, seasonal expansion/contraction will doom it to cracking.
John
Re: Poly ? - JR1 - 06-18-2016
IMHO you can spray with GF Enduro Clear Poly or Conversion Varnish whenever convenient.
Re: Poly ? - AgGEM - 06-20-2016
Thanks folks!
Ag