Woodnet Forums
Keyboard slide and tray (SE MN) - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Keyboard slide and tray (SE MN) (/showthread.php?tid=7308702)



Keyboard slide and tray (SE MN) - dkarst - 06-28-2016

This is a Details (now Steelcase) Stella commercial quality keyboard arm and platform. Don't even think about comparing this to the $35 wiggly things you see at Office XXX supply. This is new in box, never used but I bought quite some time ago for a project and went a different direction. The arm model number is CMCSQ835 and I have the instructions and mounting hardware. The arm allows up/down and tilt/swivel and slides in/out on the track you can see included in photo. It is very heavy duty and will require solid mounting on the underside of your desk. Here are specifications.

Unique cable-controlled mechanism provides patented, knob-free adjustability.
Mechanism height range: 8-1/4" travel range, 2" above the worksurface to 5" below.
Height is activated by tilting the support platform rearward approx. 3º, positioning the unit at the desired height and releasing. The unit will stay at the desired height until repositioned.
Degrees of tilt angle possible: Between +/-15 degrees. Tilt is activated by pressing button located on underside of the tray center
Tilt angle is remembered by mechanism after each height adjustment

The keyboard platform is reversible for either right/left mouse position is has padded palm rests for both keyboard and mouse areas. It is pebble gray color.

New these are ~$269 for the arm and $70 for platform ~ $340 and I am selling for less than half. I have photos of you PM me

Steelcase – Details keyboard slide and tray
Stella model CMCSQ 835 slide and XO4564-835 tray

http://www.details-worktools.com/product_details.php?pid=569

$120 and would prefer local pickup or will ship at buyer's expense but it is very heavy.


Construction: Arm is cast aluminum. Track is steel.
Application: Use in straight or corner workstation configurations with all Details platforms.
Ideal for intensive computer user or multi-user workstation.
Unique cable-controlled mechanism provides patented, knob-free adjustability.
Applicable to either wood or metal surfaces.
Mechanism height range: 8-1/4” travel range, 2” above the worksurface to 5” below. Height is activated by tilting the support platform rearward approx. 3”, positioning the unit at the desired height and releasing. The unit will stay at the desired height until repositioned.
Degrees of tilt angle possible: Between +/-15 degrees. Tilt is activated by pressing button located on underside of the tray center.
Tilt angle is remembered by mechanism after each height adjustment.
Fixed mount mechanism is able to adjust height and tilt, but does not swivel or store.


Re: Keyboard slide and tray (SE MN) - OldWoodChuck - 06-28-2016

That URL takes you to: https://www.steelcase.com/products/accessories/computer-support/
but didn't see a keyboard support.


Re: Keyboard slide and tray (SE MN) - dkarst - 06-29-2016

Sorry, I guess they've changed their web... if you go here
https://www.steelcase.com/products/computer-support/keyboard-platforms-mechanisms/
and then look under "features" and "mechanisms" you can see the Stella mechanism. The arm curvature shape is updated from mine a bit.


Re: Keyboard slide and tray (SE MN) - OldWoodChuck - 06-29-2016

Looks good but I've had this el cheapo Fellows brand keyboard for about three years now and it has given me good service. So sorry but I'll have to pass.

Chuck