+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: drywall routers, should I get one? (/showthread.php?tid=7317170)
drywall routers, should I get one? - EricU - 07-12-2016
Is the rotozip worth the $10 premium? Is there really any difference between them?
I went looking for one this week at HD, and they didn't have any. All ship to store. Makes me wonder if this is a tool that nobody wants to own, but just buys and returns when the job is done.
Re: drywall routers, should I get one? - crokett™ - 07-12-2016
I have a rotozip. I haven't used it for drywall since I bought the HF multitool. the HF tool works well on drywall and is also useful for many other things. It's also much cheaper than a rotozip. round holes aren't quite as convenient as a rotozip, but they're certainly doable.
Re: drywall routers, should I get one? - EricU - 07-12-2016
the advantage to the router is to be able to put the drywall up first, and then cut the hole. I just did a couple of 4" j-box holes the old fashioned way, and it came out fine. But it was a pain, and the sheet was only 2x4'. I'm going to do some full sheets soon, and the router route seems like it would be a lot easier.
I just got a multitool, and it does make drywall repair a lot easier. Wish I had one a couple of years ago.
Re: drywall routers, should I get one? - Bob10 - 07-12-2016
rotozip is good if you are doing several can lights or ceiling boxes but they make a whole lot of dust so if you are not doing several or working in an area that really shouldn't get dusty stick with your multitool
Re: drywall routers, should I get one? - crokett™ - 07-12-2016
I hung 50+ sheets of drywall earlier this year and put them up then cut the holes with the HF.
Re: drywall routers, should I get one? - fredhargis - 07-12-2016
I've had mine for about 10 years, and it only gets used occasionally. Still, it's fairly handy for sheet rock...but not much else. In addition to the dust mentioned above, it seems to be quite a bit louder than other hand held tools.
Re: drywall routers, should I get one? - Mr_Mike - 07-12-2016
If I were buying one today, I'd buy a battery powered one for whatever set of battery powered tools I own.
Beats the snot out of a multi-tool when doing lots of work.
For small jobs, I still use a utility knife. They still work, you know.
Apparently, Habitat thinks I need to do utility closets. Lots of holes for pipes. Best done by hand.
Re: drywall routers, should I get one? - K. L. McReynolds - 07-12-2016
Pro drywallers use a decent rotary tool(mine is a Bosch), since Roto-Gyps are not exactly commercial grade. I had one that crapped out on the second job.
Having said that, whatever you think is worth the $$ is good.
In my experience, using a rotary tool for cutouts/trimming is a LOT faster/easier than cutting before installing.
Example: Hang a full sheet across a door/window and use the tool to trim the excess beats measuring and cutting and trying not to break off the odd piece left when mounting.
Re: drywall routers, should I get one? - goaliedad - 07-12-2016
Luckily I don't hang much drywall. That said, I am glad I own a toto zip. Don't use it much, but it does the job when needed.
Re: drywall routers, should I get one? - EdL - 07-12-2016
I've got the no longer made Porter Cable, been a good unit.
Helped a friend drywall a 30 x40 garage, he had a rotogyp, not sure of the model but there was no comparison to my PC, his was used on 1/2 a box opening........
Ed