Woodnet Forums
FS: Hegner Multimax 14-E Scroll Saw, Delta Tool Rests - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: FS: Hegner Multimax 14-E Scroll Saw, Delta Tool Rests (/showthread.php?tid=7322278)

FS: Hegner Multimax 14-E Scroll Saw, Delta Tool Rests - SteveF - 08-31-2016

Nice scroll saw, made in 2012. Not much for apologies on this one, couple paint chips and a scuff on one edge of the table. The original owner has been gone for at least a year, so this hasn't seen many years of use. 

$375 plus shipping

[Image: 20160707_121715-L.jpg]
[Image: 20160707_121723-L.jpg]
[Image: 20160707_121730-L.jpg]
[Image: 20160707_121742-L.jpg][Image: 20160707_121753-L.jpg]
[Image: 20160707_121802-L.jpg]
[Image: 20160707_121817-L.jpg][Image: 20160707_121829-L.jpg]

RE: FS: Hegner Scroll Saw, Delta Tool Rests, More - SteveF - 09-01-2016

Delta 12" tool rest.

$25 plus shipping

[Image: 20160826_165409-L.jpg]
[Image: 20160826_165418-L.jpg]
[Image: 20160826_165433-L.jpg]


Delta right angle tool rest.

$35 plus shipping

[Image: 20160826_165338-L.jpg]
[Image: 20160826_165352-L.jpg]
[Image: 20160826_165401-L.jpg]

RE: FS: Hegner Multimax 14-E Scroll Saw, Delta Tool Rests - Arlin Eastman - 09-02-2016

That sure is a nice scroll saw and a good price also and way better then the one we use.

RE: FS: Hegner Multimax 14-E Scroll Saw, Delta Tool Rests - SteveF - 09-05-2016

Stanley No.68 boxwood rule. Nice shape, missing one alignment pin.

$10 plus shipping

[Image: 20160905_105159-L.jpg]
[Image: 20160905_105209-L.jpg]
[Image: 20160905_105227-L.jpg]
[Image: 20160905_105232-L.jpg]


Upson Nut Co. No.68 boxwood rule. This one has all the alignment pins.

$10 plus shipping

[Image: 20160905_105249-L.jpg]
[Image: 20160905_105300-L.jpg]
[Image: 20160905_105321-L.jpg]


Stanley No.36 boxwood caliper rule.

$26 plus shipping

[Image: 20160905_105122-L.jpg]
[Image: 20160905_105131-L.jpg]
Stanley No.104 Liberty Bell plane Type 1.

Not too many apologies on this one. There are some dings on the left side and on the very front of the right side. The japanning is quite good, probably 90%. The wood is solid, just a small sliver missing at the top on the tote. The iron is exceptionally nice for the age. I hardly ever see this model plane, much less a type 1.

$80 plus shipping

[Image: 20160905_112349-L.jpg]
[Image: 20160905_112358-L.jpg]
[Image: 20160905_112408-L.jpg]
[Image: 20160905_112422-L.jpg]
[Image: 20160905_112441-L.jpg][Image: 20160905_112453-L.jpg]
[Image: 20160905_112513-L.jpg]
[Image: 20160905_112554-L.jpg]

[Image: 20160905_112613-L.jpg]
[Image: 20160905_112627-L.jpg]
Palmgren drill press vise. 

The jaws are about 2 7/16 wide, opens to 3". It has a user made end stop that can be used on either side.

$30 plus shipping ($6)

[Image: 20160905_114034-L.jpg]
[Image: 20160905_114042-L.jpg]
[Image: 20160905_114054-L.jpg]
[Image: 20160905_114104-L.jpg]
[Image: 20160905_114114-L.jpg]
[Image: 20160905_114207-L.jpg]
Vise 4.75" jaws.  Interesting vise, user modified with 4 pivoting jaws. Great for gripping odd sized objects. The vise is Taiwanese, but I believe it dates back to the 80's. It works well. A couple corners of the pivoting jaws could use some dressing.

$60 plus shipping

[Image: 20160905_114403-L.jpg]
[Image: 20160905_114418-L.jpg]
[Image: 20160905_114429-L.jpg]
[Image: 20160905_170503-L.jpg]
[Image: 20160905_170520-L.jpg]
[Image: 20160905_170651-L.jpg]

RE: FS: Hegner Multimax 14-E Scroll Saw, Delta Tool Rests - SteveF - 09-06-2016

The Stanley 36 caliper is sold.

The Delta right angle tool rest is sold.

The Delta 12" tool rest is sold.