Woodnet Forums
Udated prices FS: LN 62 & LN 164 low angle planes - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Udated prices FS: LN 62 & LN 164 low angle planes (/showthread.php?tid=7322977)

Pages: 1 2

Udated prices FS: LN 62 & LN 164 low angle planes - foneman - 09-20-2016

I am selling two used LN low angle planes. The first is an LN 62 low angle jack plane in very good condition. It is used but not abused. I would like $185 with shipping included to the USA only.  Payment by Paypal.  Thanks for looking!! 


[Image: IMG_20160919_154050009_zpsz7k8lgpj.jpg]
[Image: IMG_20160919_153915288_zpstmyua3hp.jpg]
[Image: IMG_20160919_153945126_zpslfkd5kax.jpg]
[Image: IMG_20160919_154147387_HDR_zpsxfmqdtb5.jpg]

The second one is an LN 164 Low angle smoothing plane with a plane sock included. I would like $185 with shipping included for this one. 

[Image: IMG_20160919_155822375_zpsgq5spqiz.jpg]
[Image: IMG_20160919_155920385_zpsguy0triu.jpg]
[Image: IMG_20160919_155937761_zpsmy9xmdid.jpg]
[Image: IMG_20160919_160028973_HDR_zps7wygjiic.jpg]
[Image: IMG_20160919_160306117_zpsrshii9oa.jpg]
[Image: IMG_20160919_160723698_zpspyxsgmte.jpg]

RE: Udated prices FS: LN 62 & LN 164 low angle planes - John Jones - 09-22-2016

Would you take $300 for both shipped to 30041?

RE: Udated prices FS: LN 62 & LN 164 low angle planes - foneman - 09-22-2016

Sorry John, I can't go that low. Thanks anyway!!!

RE: Udated prices FS: LN 62 & LN 164 low angle planes - John Jones - 09-23-2016

Thanks for the note. Please let me know if you change your mind.

RE: Udated prices FS: LN 62 & LN 164 low angle planes - Rob Young - 09-23-2016

I have both and usually keep the LN164 set up with about a 50 degree bevel so it cuts at just over 60 degrees.  Yes, I also know how to set up my cap irons for bevel down and they work quite well.  But sometimes, it's just easier to quit fiddling with the microscopic changes in cap-iron setback and just get things done on a piece of cantankerous wood.

$185 is a fair price for the LN164!

RE: Udated prices FS: LN 62 & LN 164 low angle planes - wrb - 09-23-2016

Is it the picture or the bottom of 164 really has deep scratches?

I ask because sometimes pictures exaggerate small things, other times don't show them much.

RE: Udated prices FS: LN 62 & LN 164 low angle planes - foneman - 09-23-2016

I do not consider them deep scratches, but everyone has different opinions of shallow and deep. Here are some additional photos with different camera angles after I cleaned it up a little better with a scuff pad.  My advice to anyone that is concerned about the scratches on the sole is to not buy this one so we both are happy at the end of the day. It is an excellent user plane, but I would not recommend it for display in your trophy case. 

[Image: IMG_20160923_120919101_zpsmrtlm7ha.jpg]on 
[Image: IMG_20160923_120940220_zpsu30qlqi7.jpg]

[Image: IMG_20160923_121020172_HDR_zpsgqqohmre.jpg]

RE: Udated prices FS: LN 62 & LN 164 low angle planes - Kansas City Fireslayer - 09-23-2016

Two excellent planes especially for the price. The 62 is one of my favorites to use. I do the final flattenings on the end grain maple butcher block boards I make with mine.

RE: Udated prices FS: LN 62 & LN 164 low angle planes - AgGEM - 09-23-2016

(09-23-2016, 05:03 PM)Kansas City Fireslayer Wrote: Two excellent planes especially for the price.  The 62 is one of my favorites to use.  I do the final flattenings on the end grain maple butcher block boards I make with mine.

LN 62 rocks!
Sole scratches? Wax galleys!
Ag

RE: Udated prices FS: LN 62 & LN 164 low angle planes - kyle5691 - 10-14-2016

Is the 164 still available? I sent a PM.