+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Hegner Polycut 3 refurb (/showthread.php?tid=7323125)
Hegner Polycut 3 refurb - iclark - 09-24-2016
I won a lot in a recent GSA auction that includes a vacuum pump, a stationary disc sander, and a scroll saw.
The scroll saw is a Hegner Polycut 3 made in 1981.
When I first got it, the lower arm was stuck and the oscillating spindle could only turn ~90*. I freed up the arm and now it seems to run okay.
Does anyone here have any experience with this model or with refurbishing one? I could use any advice that you can give me.
It came with no blade holders and the pump bellows pieces falling out as we unloaded it from the pickup.
So, I know that I need to order the blade holders, the bellows, probably a spare drive belt.
Advanced Machinery seems to have a lever-operated upgrade for the tension rod. Do I want that?
It also looks like there is a version of the segmented air blower available for this model. Is that something that I want?
What else should I order while I am getting the parts that I know that I need?
Unfortunately, it looks like they do not sell replacement dust seals the on/off switches. The ones on the saw are showing their age and are a bit gummy. Is there a source for replacements for those rubber/plastic cups?
I have not really used a scroll saw before so please consider me a newb when it comes to them.