Woodnet Forums
Electrical connectors - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Electrical connectors (/showthread.php?tid=7323134)



Electrical connectors - Scouter - 09-24-2016

Can you use butt connectors on 120v ac line?


RE: Electrical connectors - blackhat - 09-24-2016

With a few exceptions, no.  If you are referring to the blue, red, yellow automotive style crimp connectors, no.


RE: Electrical connectors - JTTHECLOCKMAN - 09-24-2016

No and why would you??  There is more to your question??? Remember any splice connector must be proper voltage rated and UL approved. With butt connectors you have exposed ends and even using the right crimp tool it is possible to have exposed copper from the indent. Even if taped not good practice.  Ground wires yes. 

With that all said they do make UL approved butt connectors for 120volts and higher but they are not the automotive type you see.


RE: Electrical connectors - Phil Thien - 09-24-2016

Have you seen these?

https://www.amazon.com/Ideal-Industries-Spliceline-In-line-Connectors/dp/B008D23AZO


RE: Electrical connectors - Roly - 09-24-2016

What are you trying to do that you want to use butt connectors ?  Roly


RE: Electrical connectors - fredhargis - 09-25-2016

darn, several years ago I was looking for those and couldn't find them anywhere (in line splice)!


RE: Electrical connectors - Bob10 - 09-25-2016

I looked at those and from what I read seems people are using those in line in walls?  I might use them in a box but doubt it as I have seen many that come 
attached to fixtures release wires like back stabbed receptacles.  These are what I am talking about I cut them off and use wire nuts


[Image: %24_1.JPG?set_id=880000500F]


RE: Electrical connectors - geek2me - 09-26-2016

(09-25-2016, 12:03 PM)Bob10 Wrote: I looked at those and from what I read seems people are using those in line in walls?  I might use them in a box but doubt it as I have seen many that come 
attached to fixtures release wires like back stabbed receptacles.  These are what I am talking about I cut them off and use wire nuts


[Image: %24_1.JPG?set_id=880000500F]

Those work very well, much better than a wire nut and more reliable, especially since almost everyone seems to install wire nuts incorrectly.  All connections must be in a box, though, so you can't just use them in a wall without a box.


RE: Electrical connectors - Phil Thien - 09-26-2016

(09-26-2016, 12:21 PM)geek2me Wrote: Those work very well, much better than a wire nut and more reliable, especially since almost everyone seems to install wire nuts incorrectly.  All connections must be in a box, though, so you can't just use them in a wall without a box.

I'm a big fan of the Wago stuff including the Wall-Nuts, but I think the wire nut is still the gold standard.