Woodnet Forums
Milwaukee 5615-29 Bearing replacement - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Milwaukee 5615-29 Bearing replacement (/showthread.php?tid=7323297)



Milwaukee 5615-29 Bearing replacement - paarker - 09-29-2016

As my router was winding down it sounds like I have a bad bearing. I spun the collet by hand and had a slight grinding sound too. I am planning on replacing the bearing(s) in it. When looking at the drawing for it on replacement parts I am not sure if there is one or two bearings. They are not listed on the part ordering chart. I know one is located by the collet of the router and looking at the drawing it looks like there is one located at the other end as well. These would be part #1(at the top) and part #2 (near the collet) can anyone verify this information for me? If you can, would you also know where to get the top bearing if it is there? The one near the collet is listed on the site.


Thank you for the help,
Don


RE: Milwaukee 5615-29 Bearing replacement - fredhargis - 09-29-2016

It is indeed  a ball bearing at each end. I have all kinds of trouble linking PDFs, but let me try: (part number included)

linky


RE: Milwaukee 5615-29 Bearing replacement - paarker - 09-29-2016

Thanks for the quick response! Parts are ordered!