Delta 12/14 bearings - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Delta 12/14 bearings (/showthread.php?tid=7323301)

Delta 12/14 bearings - jimc38 - 09-29-2016 I just took my saw apart and need new bearings. The larger bearing is a 2505 but the other bearing only has Fafnir pat no 3423141 on the seal and 204PP7 on the outside of the bearing. Can anyone give me more information on this. I haven't been able to get back onto the Vintage site since they changed their format or I would try there to. Thanks for any info you can give me. Jim RE: Delta 12/14 bearings - JGrout - 09-29-2016 This one?  <click link to go to page  RE: Delta 12/14 bearings - jimc38 - 09-29-2016 The inner ring on mine is wider than the outside ring. I'll go don to my shop and take some measurements. It does look similar to that one though. Jim RE: Delta 12/14 bearings - JGrout - 09-29-2016 there is a link embedded in the words this one? that link is from the part number of a google search.  If it has an extended inner ring part of the number you supplied is missing IME RE: Delta 12/14 bearings - jimc38 - 09-29-2016 Measurements bore 20 mm, od 47 mm, inner ring 17.75 mm and outer ring 14 mm. I just checked the link. The difference is that is to part number. The markings on the bearing is a tatent number. I'll check further to see what I can find. Thanks for pointing me in the right direction. Jim RE: Delta 12/14 bearings - Ed in NC - 09-30-2016 You might want to check over at owwm.org. Look at the 5th or 6th entry under Old Woodworking Machines, and you will find out about Accurate Bearings, and how to order from them. They have a rep who deals with woodworking machine bearings, and I am sure she can sell you what you need. Give it a look Ed RE: Delta 12/14 bearings - daddo - 09-30-2016 https://www.motionindustries.com/productDetail.jsp?sku=00052240 RE: Delta 12/14 bearings - jimc38 - 10-03-2016 I researched the bearings and found what I needed on Amazon. Ordered them on Friday and got them today. Thanks to those that helped me with the research. Jim