Woodnet Forums
FS: Stanley 78, Jennings auger bits, C clamps - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: FS: Stanley 78, Jennings auger bits, C clamps (/showthread.php?tid=7323566)

Pages: 1 2

FS: Stanley 78, Jennings auger bits, C clamps - SteveF - 10-06-2016

Stanley No.78 rabbet plane. A nice plane, most of the original japanning.

$45 plus shipping

[Image: 20161006_163310-L.jpg]
[Image: 20161006_163322-L.jpg]
[Image: 20161006_163332-L.jpg]

Jennings auger bit set. All 13 sizes. The 4 is a Jennings pattern bit, the rest are Russell Jennings. They all have good lead screws and spurs. There is some pitting on some of them, the vast majority of which is not near the cutting edges.

$40 plus shipping

[Image: 20161006_163552-L.jpg]
[Image: 20161006_163603-L.jpg]
[Image: 20161006_163609-L.jpg]
[Image: 20161006_163614-L.jpg]

Set of four Craftsman 4" clamps. Great shape, very good quality.

$20 plus shipping

[Image: 20161006_163155-L.jpg]
[Image: 20161006_163211-L.jpg]

RE: FS: Stanley 78, PC trim saw, vises, Record 4 - SteveF - 10-08-2016

Here's a couple more items:

Keen Kutter 9" drawknife. I ground the edge, just needs honing. The are a few spots of pitting, not many and mostly on one end. The handles are tight.

$30 plus shipping

[Image: 20161008_151420-L.jpg]
[Image: 20161008_151443-L.jpg]
[Image: 20161008_151449-L.jpg]
[Image: 20161008_151500-L.jpg]
[Image: 20161008_151511-L.jpg]


Carving set. There are 8 pieces. All are marked made in USA, but I really don't know who made them. The fishtail has a couple of small chips in the edge.

$40 plus shipping

[Image: 20161008_152559-L.jpg]
[Image: 20161008_152603-L.jpg]
[Image: 20161008_152610-L.jpg]
[Image: 20161008_152638-L.jpg]

RE: FS: Stanley 78, Jennings auger bits, C clamps - SteveF - 10-09-2016

Sold so far:

Jennings auger bits

Craftsman C-clamps

Keen Kutter 9" drawknife

RE: FS: Stanley 78, Jennings auger bits, C clamps - SteveF - 10-09-2016

More tools:

Porter Cable 314 HD 4 1/2" trim saw. Best trim saw ever, worm drive. It looks, runs, and sounds great. 

On this one I need payment by something that doesn't hit me with fees, really no margin on this.

$160 plus shipping

[Image: 20161009_115708-L.jpg]
[Image: 20161009_115728-L.jpg]
[Image: 20161009_115740-L.jpg]
[Image: 20161009_115805-L.jpg]
[Image: 20161009_115820-L.jpg]
[Image: 20161009_115829-L.jpg]
Record No.4 plane. This has most of the original jappaning. I refinished the wood, finish was horrible on it.

$45 plus shipping

[Image: 20160921_165406-L.jpg]
[Image: 20160921_165414-L.jpg]
[Image: 20160921_165421-L.jpg]
[Image: 20160921_165428-L.jpg]
[Image: 20160921_165453-L.jpg][Image: 20160921_165523-L.jpg]
[Image: 20160921_165540-L.jpg]
Sandvik 277 saw. Looks like it's been barely used, still sharp.

$25 plus shipping

[Image: 20160913_164640-L.jpg]
[Image: 20160913_164647-L.jpg]
[Image: 20160913_164707-L.jpg]
[Image: 20160913_164718-L.jpg]
[Image: 20160913_164741-L.jpg]
[Image: 20160913_164748-L.jpg]
[Image: 20160913_164809-L.jpg]

RE: FS: Stanley 78, Jennings auger bits, C clamps - Jason28 - 10-09-2016

I LOVE those little PC314s. If nothing else, they're great for breaking down sheets goods, but they're also great for crosscuts in 4-5/4 stock. $160 is a great deal for one.

RE: FS: Stanley 78, Jennings auger bits, C clamps - SteveF - 10-09-2016

Dayton 4" drill vise. The jaws are really closer to 4 1/4". Super nice older model, like new.

$60 plus shipping

[Image: 20161009_184248-L.jpg]
[Image: 20161009_184313-L.jpg]
[Image: 20161009_184406-L.jpg]
Craftsman/Palmgren tilting 2 1/2" jaw drill press vise. Another really nice vise. The gold paint dates it to the 50's or 60's.

$40 plus shipping

[Image: 20161009_183722-L.jpg]
[Image: 20161009_183739-L.jpg]
[Image: 20161009_183757-L.jpg]
[Image: 20161009_183823-L.jpg]
[Image: 20161009_183854-L.jpg]
[Image: 20161009_183943-L.jpg]
[Image: 20161009_184016-L.jpg]

RE: FS: Stanley 78, Jennings auger bits, C clamps - Admiral - 10-09-2016

Sandvik made some worthy saws. Whoever gets it will not be disappointed. Don't get spooked by the habdle, it's actually ok.

The PC trim saw is no longer made, excellent tool and it's priced well. I paid full retail for mine, that's how much I think of it!  They are like hen's teeth to find.

RE: FS: Stanley 78, Jennings auger bits, C clamps - SteveF - 10-20-2016

Sold so far:

Jennings auger bits

Craftsman C-clamps

Keen Kutter 9" drawknife

Sandvik 277 saw

Porter Cable 314 trim saw

RE: FS: Stanley 78, Jennings auger bits, C clamps - Admiral - 10-20-2016

Someone is missing the boat on that PC trim saw, they don't come around often. Excellent buy.

RE: FS: Stanley 78, Jennings auger bits, C clamps - SteveF - 10-22-2016

(10-20-2016, 07:39 PM)Admiral Wrote: Someone is missing the boat on that PC trim saw, they don't come around often. Excellent buy.

Thanks Rich!

Somebody finally caved in, it's sold. 
Smile