+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: No. 6 plane: What's it good for? (/showthread.php?tid=7323848)
No. 6 plane: What's it good for? - overland - 10-14-2016
Just fixed up and sharpened an old Type 9 No. 6 Stanley that I picked up cheap a while back (I couldn't help myself). It cuts well. But what's a No. 6 good for? Has anyone here found it useful?
RE: No. 6 plane: What's it good for? - Rob Young - 10-14-2016
For a while, that was my go-to-size for jointing and flattening stuff that was less than case-sized but bigger than tiny box sized.
Also worked great on a shooting board, plenty of mass but not as big as a 7 or 8.
I've since retired it to the traveling tool-kit where it serves as the jointer. Lighter weight than my 7 or 8 but still longer & wider than a 5. Did have a 5-1/2 for a while but never really got into that one.
RE: No. 6 plane: What's it good for? - Bruce Haugen - 10-14-2016
It's just about my favorite plane. With that and a smoother and block plane I can do almost any planing that needs to be done around here.
RE: No. 6 plane: What's it good for? - JimBelair - 10-14-2016
Quite useful. For smaller jointing tasks, as others have pointed out.
RE: No. 6 plane: What's it good for? - Admiral - 10-14-2016
As noted, a smaller jointer and shooter; also very useful in flattening panels and rough stock. I start with a scrub, then #5, then #6 and if needed, not always needed, the #7. It got a bad rap from Blood and Gore.
P.S.: Because of Patrick's trashing of it on B&G, a #6 can be had for significantly less than a #7, and can do 80% of what a #7 can do.
RE: No. 6 plane: What's it good for? - MarkSingleton - 10-14-2016
My number six was the one that taught me just how good hand planes can be.
Because when I bought it, the PO had sharpened it correctly.
Opened my eyes. I immediately made a shooting board.
Have never looked back.
Oh, and yes, I own a seven and eight too for larger stuff.
RE: No. 6 plane: What's it good for? - KlausK. - 10-14-2016
Having a #7 and a #8 I never missed a #6. In the opposite: I found this size rather needless. Then in 2015 I was lucky enough to win a #6 in a woodworker contest. What shall I say, I just love the plane and it's size! In fact it's one of my most used planes and one that I really enjoy to use. I call myself a moron for not trying this plane sooner.
Klaus
RE: No. 6 plane: What's it good for? - Bibliophile 13 - 10-14-2016
My #6 is my shooting plane. It's the perfect size and weight.
It's also good for handing to my daughter when she wants a long plane but is too tired to push the #7 around.
RE: No. 6 plane: What's it good for? - EricU - 10-14-2016
Admiral sold me a #7, and it's a pleasure to use. I am joining (shooting in pairs) some plates for instruments, and it's a little awkward. I am probably going to get the #6 off the shelf and try shooting the plates with it. I remember doing this before with a #3 (probably), and the #7 made things a lot easier. Although I didn't have a special shooting board on the previous efforts, just built it this week.
RE: No. 6 plane: What's it good for? - overland - 10-14-2016
It sounds like folks find a No. 6 useful for:
a. shooting (presumably with a straight iron). But I suppose the sides have to be pretty square for this.
b. flattening and jointing on small-scale projects (with a slightly cambered iron?)
c. travel kits
Just fooling around with mine, making some shavings, this sounds about right.