+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Preperation for refinishing front door (/showthread.php?tid=7323943)
Preperation for refinishing front door - Sawdustd - 10-17-2016
The finish (oil based) on the exterior side of our beautiful 10 year old front door, solid core, is beginning to fade. I have a 3 day window of 80 degree temp so plan to refinish the exterior side with GF High Performance. The door faces north and is protected from sun and rain by a 6' wide porch.
Question: Should I sand lightly by hand with 400 grit to get better adhesion? High Performance dries quickly so I'll remove the door, lay it on saw horses and go at it. Think I can get 2 coats on and the door rehung by night fall.
Dave
RE: Preperation for refinishing front door - jteneyck - 10-17-2016
Yes, but I would not use HP Poly for an exterior application. GF says "It is suitable for interior woodwork, case goods, furniture, and cabinets."
GF Exterior 450 would be a much better choice and will dry just as quickly.
John
RE: Preperation for refinishing front door - Sawdustd - 10-18-2016
Thanks John. 450 it is.
Dave