Woodnet Forums
HTC Outfeed Roller table - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: HTC Outfeed Roller table (/showthread.php?tid=7324709)

Pages: 1 2

HTC Outfeed Roller table - Jack01 - 11-07-2016

HTC Out feed Roller table
Great condition , located in Denver, CO  here is the link   OUTFEED


[Image: 25379894079_214b350daf_n.jpg]" />

[Image: 22837410108_a02282b778_n.jpg]

[Image: 22837412028_b55f2544d9_n.jpg]

RE: HTC Outfeed Roller table - BloomingtonMike - 11-08-2016

If it was local I would buy this to keep myself from using outfeed as a bench LOL. Good luck. Guessing I am going to end up with a mobile bench outfeed.

RE: HTC Outfeed Roller table - Jack01 - 11-10-2016

Thanks Mike

Hopefully local woodneter will buy this.

RE: HTC Outfeed Roller table - MichaelS - 11-10-2016

I had this on my PM66, not sure which size it is as the table comes in 2 versions - but both are solid, highly valuable, and increase the safety of a fixed table saw by measures.

Good luck w/ the sale and I encourage any who don't have an outfeed table or have considered a change to look closely at this device. It's a good one!

Michael

RE: HTC Outfeed Roller table - Jack01 - 11-15-2016

----BUMP-----

RE: HTC Outfeed Roller table - Randy B. - 11-16-2016

Wish this was closer!

RE: HTC Outfeed Roller table - Jack01 - 12-04-2016

----BUMP---

RE: HTC Outfeed Roller table - Dennis Puskar - 12-04-2016

What a great outfeed table well worth $250.00.

RE: HTC Outfeed Roller table - Farmerdave - 12-30-2016

Will this fit a powermatic 66 with  Biesemeyer fence?
Thanks,Dave

RE: HTC Outfeed Roller table - Jack01 - 12-30-2016

Yes it will fit.
It connects to cabinet in the back.
I have installation manual ,I will send that to you by PM