2nd of carbide tools. - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: 2nd of carbide tools. (/showthread.php?tid=7325859) |
2nd of carbide tools. - jaustin - 12-04-2016 Cleaning up the shop and have some 2nds of the tools I make. Figure I would offer them for a discount if anyone is interest. Shipping is $6.80 per order. 1-rougher/finisher combo mounted on a 1/2" stainless steel bar. This tool can accept either a rougher or 16mm finisher carbide insert. $30 SOLD 1-16mm finisher on a 1/2 steel keystock bar This is shorter than my normal size tool. 7" overall length with a 2" tang. $22 Sold 1-Diamond detailer on a 3/8 stainless steel bar. This is shorter than my normal length. 7 1/2" overall length with a 2" tang $25 SOLD 1-12mm finisher on a 3/8 steel keystock bar. one edge is rounded over, but doesn't hurt use of the tool. 9" overall length with a 2" tang $25 Sold 2 1 left Sold-12 mm finisher on 3/8" stainless bar 9" overall with a 3" tang $25 Each RE: 2nd of carbide tools. - jaustin - 12-11-2016 only one left 1-12mm finisher on a 3/8 steel keystock bar. one edge is rounded over, but doesn't hurt use of the tool. 9" overall length with a 2" tang $25 Sold [/url] [url=http://s94.photobucket.com/user/gunracksonline/media/Carbide%20inserts/20161204_170943_zpsgclaghlo.jpg.html] RE: 2nd of carbide tools. - Oldwood2409 - 12-12-2016 PM sent RE: 2nd of carbide tools. - jaustin - 12-12-2016 All 2nd's have been sold |