+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Jet 1642, PM 3520 and PM4224 owners? (/showthread.php?tid=7325975)
Jet 1642, PM 3520 and PM4224 owners? - n7bsn - 12-07-2016
I'd like people that own these to go measure the span between the legs. That is the short distance.
I'm looking at using the Lift, Lock and Roll mobile system on another lathe and need some dimensions to compare.
TTFN
RE: Jet 1642, PM 3520 and PM4224 owners? - JustinS - 12-07-2016
The overall width of each set of legs on my 3520B is 24". The gap between each foot on each set of legs (which I think is what you are asking for) is just shy of 18".
RE: Jet 1642, PM 3520 and PM4224 owners? - Arlin Eastman - 12-07-2016
Ralph
I have the PM3520b and you really did not specify top or bottom
So this is what I did
Top of the short side
inside 8 3/4
outside 9 3/4
Top long side
Inside 38 1/4
Outside 501/2
Inside of the bottom is 22 7/8
Outside of the bottom is 24
RE: Jet 1642, PM 3520 and PM4224 owners? - n7bsn - 12-07-2016
Thanks guys, the measurement Justin did is the one I needed
I hope the 1642 is less, as the Grizzly I'm looking at is 20