+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Barracuda Chuck screws (/showthread.php?tid=7326027)
Pages:
1
2
Barracuda Chuck screws - JamesR - 12-08-2016
Would anyone happen to know the part number of the screws are from Penn state or better yet Mcmaster Carr or Fastenal. I went to local Fastenal and the kid looked at me like huh you expect me to look something up.
RE: Barracuda Chuck screws - Arlin Eastman - 12-08-2016
If you call PSI they will help you out on that part.
RE: Barracuda Chuck screws - AnthonyYak - 12-08-2016
Measure the diameter and thread pitch and look them up on Fastenal. I bought screws for my OneWay at fastenal
RE: Barracuda Chuck screws - Leo Van Der Loo - 12-08-2016
If you buy a set of jaws for your Oneway chuck you get also a set of screws with them, having bought a couple of jumbo jaws and other jaws, I have a good handful of Oneway screws.
RE: Barracuda Chuck screws - Birdseye Bill - 12-08-2016
That must be new because I purchased some new jaws with the idea that I would have some spare screws and there were no screws included. It bummed me out that I didn't get screws with the purchase.
RE: Barracuda Chuck screws - Leo Van Der Loo - 12-08-2016
Not new at all Bill, but I bought them from Oneway, and this is over the 20 years or longer that I have had and used the Oneway chucks.
Maybe your seller did not leave the screws with the jaws, even with the 2 sets of rubber bumpers for the Jumbo and Mega Jumbo jaws were two sets of the longer screws included.
I bought the extra bumpers because over the years these have been damaged and the rubber has gotten harder so it’s easy to break some pieces off.
RE: Barracuda Chuck screws - Herb G - 12-09-2016
Here ya go.
http://www.woodcraft.com/product/146803/jaw-screws-8-per-pack.aspx
http://www.woodcraft.com/product/15M87/teknatool-jaw-fastening-spares-kit.aspx
http://www.woodcraft.com/product/417753/nova-ssk-spare-screws-for-jaws.aspx
Take your pick.
RE: Barracuda Chuck screws - MichaelMouse - 12-09-2016
Take the chuck to a Borg and go to the machine screw (metric) drawers. Find the ones that fit.
RE: Barracuda Chuck screws - Arlin Eastman - 12-09-2016
(12-08-2016, 10:22 PM)Birdseye Bill Wrote: That must be new because I purchased some new jaws with the idea that I would have some spare screws and there were no screws included. It bummed me out that I didn't get screws with the purchase.
Bill
You do not get the screw with just buying a set of Jaws. You have to buy the whole package to get them.
RE: Barracuda Chuck screws - AHill - 12-09-2016
(12-09-2016, 12:19 PM)Arlin Eastman Wrote: Bill
You do not get the screw with just buying a set of Jaws. You have to buy the whole package to get them.
Must be a PSI thing. Nova and Oneway jaws both come with a set of screws each time you buy a new set of jaws. The thread pitch is easy enough to determine at the fastener section at any big box store. They usually have a device mounted to a column where you can match your particular fastener. The length with the right kind of head might be more difficult to match - particularly for the smaller screws. Good luck!