+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: WTB: Byrd Shelix for DW735 (/showthread.php?tid=7326761)
WTB: Byrd Shelix for DW735 - Axehandle - 01-06-2017
Just seeing if anyone has one. Ill buy it new if I have to. I got a busted up 735 for cheap and figured I would change to a Shelix while I have it apart. I have about 300 bf of Ipe I salvaged out of a pile of storm debris to mill. Its hard and dense and has probably got embedded marsh sludge on the surface so I want the carbide.
RE: WTB: Byrd Shelix for DW735 - FrankAtl - 01-07-2017
Somebody was selling those recently but I can't remember who. Maybe they will chime in.
RE: WTB: Byrd Shelix for DW735 - DaveParkis - 01-07-2017
Brian from Sunny Florida had some. You might want to drop him a PM or call his business.
RE: WTB: Byrd Shelix for DW735 - John Clifford - 01-07-2017
I have one. I'll send you a pm when I get home.
John.
RE: WTB: Byrd Shelix for DW735 - Steve N - 01-07-2017
Sent you a PM
RE: WTB: Byrd Shelix for DW735 - nicobie - 01-08-2017
If there is one still available, I could use one too.
Nick
RE: WTB: Byrd Shelix for DW735 - Steve N - 01-09-2017
(01-08-2017, 01:49 PM)nicobie Wrote: If there is one still available, I could use one too.
Nick
Holding pattern here as I haven't heard back from Axe.
RE: WTB: Byrd Shelix for DW735 - Christopherandco - 01-09-2017
I'd be interested in one as well if you get a good deal
RE: WTB: Byrd Shelix for DW735 - Brian in sunny FL - 01-10-2017
The DW735 heads are hard to come by these days so doubt anyone will cut them too deep. I have an order arriving hopefully on Friday that has been on order wth Byrd for 4 months. Next shipment will be 2.5X as many heads but may take longer than 4 months to get.
RE: WTB: Byrd Shelix for DW735 - Axehandle - 01-13-2017
PMs responded to. I think I found one.