+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: I would really like to see some more (/showthread.php?tid=7327438)
Pages:
1
2
RE: I would really like to see some more - Mike Brady - 02-05-2017
Great bench and vise! Is the scroll-work top edge of the vise chop functional, or just decorative? My vise chop is long (almost 24") and is straight. There are areas along its length that seem to hold work better. Your shaped edge might address that. I don't really know. Let us know how this works for you.
RE: I would really like to see some more - knockknock - 02-05-2017
I made a sheath for a small draw knife.
[attachment=1243][attachment=1244][attachment=1245]
RE: I would really like to see some more - AgGEM - 02-05-2017
Very
!Ag
RE: I would really like to see some more - Adnick - 02-05-2017
Mike B:
Thanks, yes it's functional, does help with alignment of stock, especially from the bottom...
RE: I would really like to see some more - MattP - 02-06-2017
OK, I am going to cheat because this was my first sale and I'm pretty happy. I learned how to refinish furniture doing my household furniture. I like doing it, so recently I decided to turn it into a sort of side hustle. I have started buying an occasional piece of furniture on Craigslist, refinishing it and reselling. My first sale today:
Before, a 1950s more or less mahogany veneer drop leaf table. $60 on CL:
[attachment=1255]
After, I stripped it and french polished it.
[attachment=1256]
After, after, I sold it today.
[attachment=1257]
RE: I would really like to see some more - Adnick - 02-06-2017
Outstanding, it's things like that, that make every day a holiday!
RE: I would really like to see some more - bandit571 - 02-08-2017
Needed a small tote, to hold all the Yankee stuff. Then it has to fit IN a drawer on the new dresser...
[attachment=1272]
Had a long piece of scrap 1x6....and added dovetail pins, thinking I could use the longer board as a bottom to these two shorter boards..
[attachment=1273]
Ran into a problem with the grain directions...sooooo, the "bottom" became a side. Did not have a second long board...
[attachment=1274]
But, I had a few pieces of 1/4" plywood scraps. Added a brace along one edge, to have a place to nail and glue the plywood to..and clamped it up..
[attachment=1275]
letting the glue sit, overnight. Maybe later today,I can add a handle, and maybe a divider, or two. Just so I can stash all of these away in Drawer #4..
[attachment=1276]
And these are just half of what I need to stash...including that Stanley #70 Box Scraper .......If you want, I can post the completed pictures, later?
RE: I would really like to see some more - C. in Indy - 02-09-2017
I welcomed some sunlight and a new Hemmings Classic Car magazine at the house this afternoon. Also have laid-in 4 corners on a little gift box to finish later:
<img src="http://i32.photobucket.com/albums/d38/C66RUPPEL/HereComestheSun_zps7shkzsxx.jpg" border="0" alt=" photo HereComestheSun_zps7shkzsxx.jpg"/>
Chris
RE: I would really like to see some more - Arlin Eastman - 02-16-2017
Good work guys and thanks for showing it. You can make your own post about it thou