Woodnet Forums
New Plow Plane - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: New Plow Plane (/showthread.php?tid=7327521)



New Plow Plane - Philip1231 - 02-01-2017

Not to steal anyones thunder, but it looks like LV may beat LN to the punch on a full size plow plane.
Perhaps the LV spokesperson will chime in with the details, for the folks over here.


RE: New Plow Plane - AHill - 02-01-2017

LV beat LN to the punch on ANY plow plane, since they're already selling the small plow plane.


RE: New Plow Plane - Mike Brady - 02-01-2017

Saw it on another forum.


RE: New Plow Plane - Paul-in-Plymouth - 02-02-2017

https://forums.woodnet.net/showthread.php?tid=7285080&pid=7285145&highlight=plow+plane#pid7285145

Down at the bottom of this thread from last May, Mr. Lee said pictures in 4-6 weeks.  I still have not seen any pictures, but would like to.  Maybe LV will show the plane at Handworks 2017.


RE: New Plow Plane - Derek Cohen - 02-02-2017

Wrong thread.

Try these ...

http://www.sawmillcreek.org/showthread.php?244609-A-Promise-Kept

http://www.sawmillcreek.org/showthread.php?251419-VSPP-Veritas-Small-Plow-Plane

Regards from Perth

Derek


RE: New Plow Plane - John Clifford - 02-02-2017

Not helpful to those who are not registered at Sawmill Creek, can't view the photos.


RE: New Plow Plane - Paul-in-Plymouth - 02-02-2017

Thank you, Derek.  I hope LV will show the plane in May at Handworks.


RE: New Plow Plane - Admiral - 02-02-2017

(02-02-2017, 10:19 AM)John Clifford Wrote: Not helpful to those who are not registered at Sawmill Creek, can't view the photos.

Here's Rob's posting on Woodnet;

https://www.forums.woodnet.net/showthread.php?tid=7298324


RE: New Plow Plane - Philip1231 - 02-02-2017

So I got the Post Subject wrong: it should have read "New Plow Plane, Old News"


RE: New Plow Plane - Jim Waldron - 02-04-2017

(02-02-2017, 10:19 AM)John Clifford Wrote: Not helpful to those who are not registered at Sawmill Creek, can't view the photos.

Registration is free if you need to see the pics there. Most helpful of Derek to provide the info; up to you to make use of it.