+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: 1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA (/showthread.php?tid=7328062)
Pages:
1
2
1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA - Richard D. - 02-18-2017
![[Image: Biesemeyer_1359011.jpg]](http://www.mikestools.com/Biesemefer-Manufacturing-Commercial-Tools/Biesemeyer_1359011.jpg)
Anyone know where to find one?
RE: 1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA - JGrout - 02-18-2017
make one
there are several via google search that should at least get you started
or haunt ebay until one shows up ( not likely)
RE: 1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA - TDKPE - 02-18-2017
Shark Guard, perhaps?
RE: 1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA - Robert Adams - 02-18-2017
Maybe Brett guard if they are still around. Delta has been gone do a few years now (the delta that made those machines)but you never know you might find one of those sitting in a tool store somewhere.
RE: 1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA - Stwood_ - 02-18-2017
http://www.toolpartsdirect.com/catalogsearch/result/?search_filter=Parts&q=1350375
RE: 1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA - Stwood_ - 02-18-2017
https://www.pennstateind.com/store/TSGUARD-DH.html
RE: 1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA - Joel Runyan - 02-18-2017
Funny, I just brought home a 1981 Rockwell 12-14 today that has a Biesemeyer T-square blade guard assembly stuck to it.
RE: 1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA - JGrout - 02-18-2017
(02-18-2017, 05:03 PM)Joel Runyan Wrote: Funny, I just brought home a 1981 Rockwell 12-14 today that has a Biesemeyer T-square blade guard assembly stuck to it.
I hope you intend to use it
RE: 1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA - Richard D. - 02-18-2017
Joe, I would except the folks upstairs frown upon a "shopmade" guard....no company to share liability.
TDKPE...I emailed Lee before I posted here.
STWOOD..Thanks, I couldn't find anything available. Do you know if the Penn State is a clone of the Bies? That would be too good to be true.
All....Thanks for the fast good replies...one of the best features of WN.
RE: 1350375 BIESEMEYER BLADE GUARD 12-14" HOOD REPLACEMENT-DISCONTINUED BY DELTA - BloomingtonMike - 02-18-2017
What about contacting Lee at Sharkguard.
http://thesharkguard.com