+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Clamp rack ideas- pics please (/showthread.php?tid=7328164)
Clamp rack ideas- pics please - mongo - 02-22-2017
Have a nice pile of clamps I need to store conveniently in my new shop. Anyone have some great ideas they want to share.
Need to do something better than this-
![[Image: 20170222_101605_zps8tznmobo.jpg]](http://s297.photobucket.com/user/mongocrock/media/20170222_101605_zps8tznmobo.jpg.html)
RE: Clamp rack ideas- pics please - Lynden - 02-22-2017
rack for woodworking clamps -- click on the picture to go to the site
RE: Clamp rack ideas- pics please - Jack01 - 02-22-2017
Here are pictures of the Clamp rack I build .
I used a Pine 2 X 8 board and J bolts from Home depot 10" long , drilled the holes little smaller than diameter of the J bolts in board and then just screwed in the bolts.
The spacing of the bolts was determine by the space of the clamp between the handle and inner edge of the clamp.
It took 2 hours to complete project including the hanging of the board.
The J bolts average $ 1.50 each so it was a inexpensive and quick project.
for smaller and odd size clamps I used a small section of a slot wall with hooks , it was also inexpensive . I found the material on local Craigslist.
Of course there are lot of ideas and plans on the Internet, shop notes etc. But all of them require substantial time and material.
My goal was to complete the project quickly but very functional.
![[Image: 33057279985_c12de3665a_z.jpg]](https://c1.staticflickr.com/3/2694/33057279985_c12de3665a_z.jpg)
" />![[Image: 33057281995_258d29c203_z.jpg]](https://c1.staticflickr.com/1/694/33057281995_258d29c203_z.jpg)
" />
RE: Clamp rack ideas- pics please - Admiral - 02-22-2017
20 years ago I just made a simple "A" frame, with horizontal 2x2 fir with the top of the horizontals beveled to match the A frame angle; gravity holds them in. Didn't put wheels on mine, nor did I slot the horizontals, just place the clamps side by side, I must have 50 clamps in mine as I've accumulated many over the years, so wheels likely wouldn't work, too heavy. Not unlike this picture:
![[Image: dit246_3fa_e.jpg]](http://img.diynetwork.com/DIY/2004/12/03/dit246_3fa_e.jpg)
RE: Clamp rack ideas- pics please - lilrichard2 - 02-22-2017
I've not had a plan - just added racks when clamps are added to the inventory. Here are pics that show most type clamps and their racks that most woodworkers will have.
![[Image: DSCN3601.jpg]](http://s679.photobucket.com/user/lilrichard2/media/DSCN3601.jpg.html)
![[Image: DSCN3602.jpg]](http://s679.photobucket.com/user/lilrichard2/media/DSCN3602.jpg.html)
![[Image: DSCN3603.jpg]](http://s679.photobucket.com/user/lilrichard2/media/DSCN3603.jpg.html)
![[Image: DSCN3604.jpg]](http://s679.photobucket.com/user/lilrichard2/media/DSCN3604.jpg.html)
![[Image: DSCN3605.jpg]](http://s679.photobucket.com/user/lilrichard2/media/DSCN3605.jpg.html)
![[Image: DSCN3606.jpg]](http://s679.photobucket.com/user/lilrichard2/media/DSCN3606.jpg.html)
![[Image: DSCN3607.jpg]](http://s679.photobucket.com/user/lilrichard2/media/DSCN3607.jpg.html)
![[Image: DSCN3608.jpg]](http://s679.photobucket.com/user/lilrichard2/media/DSCN3608.jpg.html)
And I used about 75% of these clamps on my most recent project - a crib for GGSON - nearly finished. All white oak - MT construction with biscuits where needed. Almost finished! This thing is more like a fort than a crib!
![[Image: DSCN3598.jpg]](http://s679.photobucket.com/user/lilrichard2/media/DSCN3598.jpg.html)
![[Image: DSCN3599.jpg]](http://s679.photobucket.com/user/lilrichard2/media/DSCN3599.jpg.html)
r2
RE: Clamp rack ideas- pics please - Steve N - 02-22-2017
I haven't done anything yet in the new barn. I have a TeePee style rack similar to the one Admiral posted but it's a PIA, and for it's total footprint it really doesn't hold that many clamps. What I had and will probably redo is 2 of these on a wooden rolling deck, with 2x4's upright on the corners and 2x4's around the top to keep things from tipping, I can clamp all manner of clamp around the outsides, and put longer clamps down into the 2 cylinders. Definitely NOT pretty, but extremely functional, and unlike a wall of clamps that you have to carry them back and forth to use, you can roll it all right up to your assembly. Whatever you decide on, you will appreciate it more if it rolls right up to your assembly.
![[Image: d97bfbf9-cf37-40d2-8fe2-6be3958eba6d_400_compressed.jpg]](http://www.homedepot.com/catalog/productImages/400_compressed/d9/d97bfbf9-cf37-40d2-8fe2-6be3958eba6d_400_compressed.jpg)
Actually this IS my rolling rack It now has a floor on it to lay C clamps, and shorties. Loaded it still rolls really well. I actually bought it from Popular woodworking at one of their, they used to have get together's when they were a real magazine. You see the staff thought it was a great idea, but after using it they all decided it sucked. I didn't believe them so I bought it. Like I said for the amount of floor space you can put a lot more clamps in trash cans, and a roller rack.
RE: Clamp rack ideas- pics please - Gibbcutter - 02-23-2017
Just built this mobile rack.
6C447485FE69_zpsaj8u5bsc.jpg.html]
![[Image: 0E0C3C66-5E66-49ED-B3C9-6C447485FE69_zpsaj8u5bsc.jpg]](http://i1377.photobucket.com/albums/ah55/egibbons76/0E0C3C66-5E66-49ED-B3C9-6C447485FE69_zpsaj8u5bsc.jpg)
[/URL]8B91C2330F1F_zpsroxuiuwv.jpg.html]
![[Image: E24E2EB5-72AE-4884-8A47-8B91C2330F1F_zpsroxuiuwv.jpg]](http://i1377.photobucket.com/albums/ah55/egibbons76/E24E2EB5-72AE-4884-8A47-8B91C2330F1F_zpsroxuiuwv.jpg)
[/URL]
RE: Clamp rack ideas- pics please - BloomingtonMike - 02-27-2017
![[Image: clamps.jpg]](http://i39.photobucket.com/albums/e169/BloomingtonMike/clamps.jpg)
Uses T Track and toilet bolts from home depot in bulk and 2x4s and 2x3s. Saw it in shopnotes.
RE: Clamp rack ideas- pics please - fredhargis - 02-27-2017
I was going to post a pic of mine, but it's pretty much the same as gibbcutter. I copied it from Norm's show when he built one.
RE: Clamp rack ideas- pics please - ez-duzit - 02-27-2017
Most of mine are simply hung on the header or on strips nailed/screwed between the wall studs.
![[Image: shop-7_zpsugsm9fca.jpg]](http://i1092.photobucket.com/albums/i414/yo-andrew/shop-7_zpsugsm9fca.jpg)