+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: FS: Veritas tools, veneer press clamps (/showthread.php?tid=7328346)
FS: Veritas tools, veneer press clamps - SteveF - 02-28-2017
Veritas wooden beading tool. Only one cutter.
$20 plus shipping
![[Image: 20170225_180841-L.jpg]](https://photos.smugmug.com/Tools/2-28-17-tool-pics/i-tzdpPgm/1/L/20170225_180841-L.jpg)
![[Image: 20170225_180855-L.jpg]](https://photos.smugmug.com/Tools/2-28-17-tool-pics/i-r3tkgfJ/1/L/20170225_180855-L.jpg)
![[Image: 20170225_180908-L.jpg]](https://photos.smugmug.com/Tools/2-28-17-tool-pics/i-LX8Lk43/1/L/20170225_180908-L.jpg)
Veritas grinder tool rest. Excellent condition with some paint splatter.
$28 plus shipping
![[Image: 20170228_172233-L.jpg]](https://photos.smugmug.com/Tools/2-28-17-tool-pics/i-hV6zqFC/1/L/20170228_172233-L.jpg)
![[Image: 20170228_172247-L.jpg]](https://photos.smugmug.com/Tools/2-28-17-tool-pics/i-9XL9X6w/1/L/20170228_172247-L.jpg)
Holman Clamp Co. (Jorgenson) 18" veneer press clamps. Set of 8. I don't think you can buy these new anymore. Some paint loss, one has a patch of pitting 2" down from the handle.
$120 plus shipping
![[Image: 20170228_172824-L.jpg]](https://photos.smugmug.com/Tools/2-28-17-tool-pics/i-7tSNcFs/1/L/20170228_172824-L.jpg)
![[Image: 20170228_172846-L.jpg]](https://photos.smugmug.com/Tools/2-28-17-tool-pics/i-gMKxx2W/1/L/20170228_172846-L.jpg)
![[Image: 20170228_172901-L.jpg]](https://photos.smugmug.com/Tools/2-28-17-tool-pics/i-QpWNBqz/1/L/20170228_172901-L.jpg)
![[Image: 20170228_172933-L.jpg]](https://photos.smugmug.com/Tools/2-28-17-tool-pics/i-3J2bgVv/1/L/20170228_172933-L.jpg)
RE: FS: Veritas tools, veneer press clamps - Arlin Eastman - 02-28-2017
Steve
Just wondering if those clamps can be made to used as a bench vise? They sure look like they could and racking would no longer be a problem either.
RE: FS: Veritas tools, veneer press clamps - Bill_Houghton - 02-28-2017
Sending you a private message on the tool rest.
RE: FS: Veritas tools, veneer press clamps - SteveF - 02-28-2017
(02-28-2017, 09:07 PM)Arlin Eastman Wrote: Steve
Just wondering if those clamps can be made to used as a bench vise? They sure look like they could and racking would no longer be a problem either.
I suspect they could be used it a vise setup. I'm not sure if it would be better than a normal twin screw situation though.
RE: FS: Veritas tools, veneer press clamps - jcredding - 02-28-2017
PM sent for the veneer press clamps.
John
RE: FS: Veritas tools, veneer press clamps - SteveF - 03-02-2017
The Veritas grinder jig and all the veneer clamps are sold, just the Veritas wooden beader remains. A set of six cutters for the beader only cost $18.
RE: FS: Veritas tools, veneer press clamps - SteveF - 03-02-2017
The Veritas wooden beader is sold.
Let's add something else:
Benchmate 21" by 36" woodworking mat. Brand new.
$9 plus shipping
![[Image: 20170302_181018-L.jpg]](https://photos.smugmug.com/Tools/2-28-17-tool-pics/i-3D97872/1/L/20170302_181018-L.jpg)