+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Which one of you.. (/showthread.php?tid=7328423)
Pages:
1
2
Which one of you.. - Kizar_Sozay - 03-02-2017
..is the woodworker in the legal zoom commercial featuring a guy in his shop. How many fingers do you have left?
In the commercial the craftsman is pushing a workpiece through a table saw with both hands running past the blade.
Man using a router with one hand on the router and the other next to the bit, on the workpiece, and guiding the router
Same guy drilling into the end piece of a wooden cylinder on one of those machines designed to spin stuff around when left unclamped
RE: Which one of you.. - ruffcutt - 03-03-2017
I have all of mine cause they can do amazing things with camera tricks.
RE: Which one of you.. - fredhargis - 03-03-2017
I haven't seen that one yet, have to keep an eye out.
RE: Which one of you.. - Admiral - 03-03-2017
https://www.ispot.tv/ad/AmJJ/legalzoom-com-woodworker
RE: Which one of you.. - AHill - 03-03-2017
Maybe the next LegalZoom commercial will be about how to use their services to protect yourself from liability with unsafe employees.
RE: Which one of you.. - JTTHECLOCKMAN - 03-03-2017
(03-02-2017, 09:56 PM)Kizar_Sozay Wrote: ..is the woodworker in the legal zoom commercial featuring a guy in his shop. How many fingers do you have left?
In the commercial the craftsman is pushing a workpiece through a table saw with both hands running past the blade.
Man using a router with one hand on the router and the other next to the bit, on the workpiece, and guiding the router
Same guy drilling into the end piece of a wooden cylinder on one of those machines designed to spin stuff around when left unclamped
Have to be honest with you and there is not one person here who has not done those things. The drilling is a small bit and the piece is locked against a back fence. I have done this. The router is a trim router and he is edge trimming with a bearing. I have done that. The table saw is somewhat questionable but I can not see where his hands are anywhere near the blade and he is using a miter gauge. He is out of line of fire for kickback. He is confident in what he is doing. But to pick apart his actions I do not see it. Awareness is the key to working in the shop. I am sure he is aware of what he is doing. Can not judge by a few second commercial.
RE: Which one of you.. - tomsteve - 03-03-2017
(03-02-2017, 09:56 PM)Kizar_Sozay Wrote: ..is the woodworker in the legal zoom commercial featuring a guy in his shop. How many fingers do you have left?i had to watch the video a couple times.looks like both hands holding the workpiece aganst the miter gage. looks like the trim router is being used safely. looks like the workpiece on the dp is clamped down, but hard to decide with about a second of footage for each tool used.
In the commercial the craftsman is pushing a workpiece through a table saw with both hands running past the blade.
Man using a router with one hand on the router and the other next to the bit, on the workpiece, and guiding the router
Same guy drilling into the end piece of a wooden cylinder on one of those machines designed to spin stuff around when left unclamped
RE: Which one of you.. - JGrout - 03-03-2017
I am sure it is me
RE: Which one of you.. - Steve N - 03-03-2017
Nah, the shadows were all wrong.
RE: Which one of you.. - Arlin Eastman - 03-03-2017
(03-02-2017, 09:56 PM)Kizar_Sozay Wrote: ..is the woodworker in the legal zoom commercial featuring a guy in his shop. How many fingers do you have left?
In the commercial the craftsman is pushing a workpiece through a table saw with both hands running past the blade.
Man using a router with one hand on the router and the other next to the bit, on the workpiece, and guiding the router
Same guy drilling into the end piece of a wooden cylinder on one of those machines designed to spin stuff around when left unclamped
That is to much to do in one day for me so it is not me.