shapers, feederand #8 - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: shapers, feederand #8 (/showthread.php?tid=7328443)

shapers, feederand #8 - tablesawtom - 03-03-2017 I have a Jet 1 1/2 HP single phase 110/220 volt  shaper for sale for $500. It is wired 110. It includes the 1/2 and 3/4 spindles and the router collet as well. The cutters are not included but are negotiable.  Pick up only. located in north central Iowa. The feeder is a Delta 1/4 HP feeder. Both were set up for a job that never materialized so there is very few hours on the shaper and maybe 20 minutes on the feeder. Asking $425 for it. I will let both go as a unit for $875. Pick up only. So pictures above. I also have a craftsman 1/2 spindle sander with a replaced 3/4 HP motor. Asking $125. Together they are set up for style and rail work. Cutters not included. I never gave it a thought but I also have a grizzly 3 HP 220 single Phase shaper I am willing to sell for $300. It doesn't have a fence. Fences aren't to hard to make though. Will produce pictures for interested party. Pick up only. And lastly I have a Stanley Bailey #8C hand plane. The japanning is all but perfect. The knob and tote show only minimal  wear and tare. And it has been precision ground and is flat within .0015 and sids have been ground square. 8's of this quality don't come around every day. Asking $175 plus shipping. Thanks for looking Tom RE: shapers, feederand #8 - tablesawtom - 03-03-2017 I forgot the pictures of the Craftsman shaper. I have a shaper jig that goes with it I would also consider selling with along with the shaper only. Again thanks for looking Tom