Woodnet Forums
Delta Machinery Badges - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Delta Machinery Badges (/showthread.php?tid=7329412)



Delta Machinery Badges - Yotie - 04-11-2017

Hello All .... I have these posted over at OWWM ... in case some of you don't venture over there, here is the skinny ....  I have had several requests for delta machinery badges so I've set up to make another run of them, (and an Atlas) Things are going to start to get busy for me here on the ranch, so let me know if there is anything you want.... what you see in the top photo are the badges that I currently have, in both 2" (drill presses, jointers, radial arm saws), and 3-5/16" (bandsaws). I also have one made for a Delta Triple Duty grinder (second photo). A fellow member had me make him one about a year ago. He has since made the plates, and I made a badge for him. I have one available ....

These are water slide decals placed on aluminum discs.....They have been sealed with clear satin acrylic, so they are ready to install.....after you drill your holes.  I need to say, for those who are not familiar, that the decal itself is very thin plastic, and can be somewhat fragile. You need to exercise care when installing etc. Keep in mind, these are very good, but they are not a silk screened decal. Let me know which one you want based on #. $9 each for the 2" badge, and $18 for the 3-5/16" badge, includes shipping in the con't USA. Paypal is great, but other forms of payment are welcome as well.....The grinder badge is........$40.00 (includes shipping).......PM if interested.

[Image: MH0iK37.jpg]

[Image: miK64Ej.jpg?1]


RE: Delta Machinery Badges - Christopher Dopp - 04-11-2017

Sent a PM for #2 in the large size for my bandsaw.

Thanks.


RE: Delta Machinery Badges - Gregory of Sherwood Forest - 04-12-2017

Any chance you can do these for Baldor buffer and grinder badges?


RE: Delta Machinery Badges - Yotie - 04-13-2017

If there is artwork, and the aluminum badge itself is easily available, then possibly. Do you have a photo of what you are after?


RE: Delta Machinery Badges - Gregory of Sherwood Forest - 04-13-2017

Not yet. I just started the rehab of the Baldors I recently picked up. Great vintage buffer and grinder for almost nothing, but need a facelift.


RE: Delta Machinery Badges - Yotie - 04-14-2017

Yes indeed! I have one as well and use it for many projects!


RE: Delta Machinery Badges - kroll - 02-21-2019

Yotie are you still making these badges I sure would like to know more about them they looking good


RE: Delta Machinery Badges - Yotie - 02-21-2019

I haven’t made any for some time ..... what would you like to know?