Ready to Use - Seven Moulding Planes (6 beads, 1 skewed rebate) - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Ready to Use - Seven Moulding Planes (6 beads, 1 skewed rebate) (/showthread.php?tid=7329827)

Ready to Use - Seven Moulding Planes (6 beads, 1 skewed rebate) - JQuacker - 04-28-2017 Ok friends, I've got six beads and one rebate. They're in a few predetermined sets, but if you're wanting something different or want to mix/match, just let me know. PM me if interested. Please read whole listing. I can send a lot more pictures for interested parties; Imgur just makes life difficult so I'm keeping it to the main things here. All planes have been tested in walnut or maple. Set One - Sargent & Co - Two Beads & One Rebate 1/4" Side Bead 3/8" Side Bead 1/2" Skewed Rebate Cleaned with Alfie Shine, mortises float filed, irons cleaned and sharpened. Sargent & Co started offering wooden planes in 1871, made by Union Factory and Sandusky. Given the sublime little cut-in on the wedge design, these are very likely Sandusky make. Boxing is slightly gappy on both planes. The 1/4" leaves a slight edge on the outside edge of the bead that scrapes off easily, an the 3/8" has a funny brass screw. Both cut very well and fast. The rebate cuts well, the photo shows will grain, cross-grain, and on end grain. I did not hollow grind this iron, but left the bit of convex nature it had and just sharpened the edge. There's a little bit of tearout on the side. Nothing troublesome, just giving info. Local to ATL - $100 obo cash, money order, or PayPal Not Local - $100 obo + shipping, money order or PayPal Willing to part with the rebate separately, should that be desired. Set Two - Owasco Tool Co - Two Beads 1/4" & 1/2" Bead Set Cleaned with Alfie Shine, mortises float filed, irons cleaned and sharpened. Owasco Tool Co. is one of Auburn Tool Co.'s many names. Auburn operated from 1864-1893 in Auburn, NY. Note the boxing is a little worn on the nose on the 1/4". 1/2" can clog a little, has a little nick in the boxing nose. It can make a slight ridge on the outside of the bead that is easily scraped away. Local to ATL - $75 obo cash, money order, or PayPal Not Local - $75 obo + shipping, money order or PayPal Can also look to combine with the (down the page) Sandusky or Union 3/8" for a 1/4", 3/8", and 1/2" set. Three - Sandusky Bead 3/8" Bead Cleaned with Alfie Shine, mortise float filed, iron cleaned and sharpened. Makes a lovely bead on this maple. Sandusky Tool Co. operated from 1869-1926 in Sandusky, Ohio.  Note the boxing is a little chipped just behind the mouth. The quirk in my example has a little edge because I adjusted mid-test. Local to ATL - $40 obo cash, money order, or PayPal Not Local - $40 obo + shipping, money order or PayPal Can also look to combine with the Owasco tool set for a 1/4", 3/8", and 1/2" set. Four - Union Factory Bead 3/8" Bead Cleaned with Alfie Shine, mortise float filed, iron cleaned and sharpened. Union Factory was Herman Chapin's company. He operated from 1828-1860 in New Hartford and Pine Meadow, Connecticut. The boxing is a little gappy, and you need to ensure the iron is properly aligned for the turn of the bead at the edge (instead of a hard edge). Note the last pic, the profile is a little tall in the center from improper sharpening in the past. This makes the bead a little shorter. I'm offering as it is for now, but may re-profile in the future should there be no takers. Local to ATL - $30 obo cash, money order, or PayPal Not Local - $30 obo + shipping, money order or PayPal Can also look to combine with the Owasco Tool set for a 1/4", 3/8", and 1/2" set. RE: Ready to Use - Seven Moulding Planes (6 beads, 1 skewed rebate) - JQuacker - 04-30-2017 Union Factory is sold