+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Need help to identify a bandsaw table (/showthread.php?tid=7330048)
Need help to identify a bandsaw table - Robert Adams - 05-07-2017
I have a bandsaw table that i got with my 1875 CB Rogers bandsaw. The saw originally had a wood table and this was just part of the deal.
Its 26x32 and 2" or so thick. Just two mounting holes but pads for another two. It has some of the lead or babbitt in the blade kerf that was used as a zero clearance years ago. No markings that i have found. Odd table layout as well. Hopefully i can figure out what it was for and maybe find it a new home. Been cleaning out the garage and shop and getting stuff together that needs to go.... Most likely going to sell that PM95 its leaning up against and my delta 18x36 drum sander as well since they get little use.
![[Image: 20170507_151943_zpszewslir9.jpg]](http://i97.photobucket.com/albums/l206/elcam84/20170507_151943_zpszewslir9.jpg)
RE: Need help to identify a bandsaw table - barryvabeach - 05-08-2017
Robert, try OWWM, they may have a lead http://www.owwm.org/viewforum.php?f=1&sid=9f3b7596008d833412e971d454d9f8df
RE: Need help to identify a bandsaw table - Robert Adams - 05-08-2017
(05-08-2017, 05:50 AM)barryvabeach Wrote: Robert, try OWWM, they may have a lead http://www.owwm.org/viewforum.php?f=1&sid=9f3b7596008d833412e971d454d9f8df
I might... Last time i asked any questions there they werent the most friendly or helpful bunch. And their draconian rules there make it hard to find out where to get parts since they dont allow anyone to refrence placesor people selling parts or services. Basically was just a place for showing off the rebuild but they cant tell you where to get the parts...