+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Dowel Jigs (second small run) (/showthread.php?tid=7330484)
Dowel Jigs (second small run) - Phil Thien - 05-26-2017
First time around I made twelve of these and they were pretty much spoken for in a couple of days.
I said I'd make another run and I've had a couple of people asking when I'd get around to it.
I just got done with another .25" acrylic job for someone and have the router all setup again. So I can make another small run of these this weekend.
If anyone is interested just shoot me a PM and I'll reply with my PayPal address.
Here is the original thread about the jigs:
https://www.forums.woodnet.net/showthread.php?tid=7329677
And here is a thread about the general concept of template doweling jigs:
https://www.forums.woodnet.net/showthread.php?tid=7328382
Same deal this time, $35 for everything or $25 for the kit. I don't know when exactly I'll cut-off orders over the weekend, I want to make sure I have enough time to get them finished before work starts next week.
Also, I've had some people ask if I plan 1/4" and 1/2" variations. Yes, I do.
RE: Dowel Jigs (second small run) - ron kanter - 05-26-2017
Sign me up for one.
Would also be interested in a smaller diameter version.
Thanks,
Ron
RE: Dowel Jigs (second small run) - Phil Thien - 05-27-2017
Four sold yesterday, I'm cutting now.
I'll cut a couple of extras in case anyone else wants one.
RE: Dowel Jigs (second small run) - Phil Thien - 05-29-2017
I've created a webpage where these can be ordered but more importantly, demonstrates the use and provides some pointers.
http://www.jpthien.com/djm.htm
As I'm sure some will notice, I'm listing them for $40 on the page ($35 here).
I also found some self-adhesive sandpaper I'm adding to the fences now. If anyone already has one w/o the sandpaper, PM me your address and I'll mail you a piece. The sandpaper prevents slipping if you don't get your clamp so tight.
RE: Dowel Jigs (second small run) - thai_woodie - 05-30-2017
I received mine, but haven't tested it yet. But it looks great. I would probably be interested in a 1/4" as well.
Neil