+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: WANTED: Small walnut slab for leg vise chop (/showthread.php?tid=7330557)
Pages:
1
2
WANTED: Small walnut slab for leg vise chop - T.J. - 05-29-2017
I'm building a split-top Roubo bench ala' Benchcrafted.com.
It'll be in soft maple with black walnut accents. However, I still need some walnut at adequate size for the vise chop.
It would be great if it had some figure or flashy grain to it, but that isn't required. I'll need it about 8/4 to 12/4 thick.
Anyone have something I can buy?
RE: WANTED: Small walnut slab for leg vise chop - JLH - 05-29-2017
I have a lot of cut offs. What width and length do you need and about what price range would you be looking at. I believe I have quite a bit of both thicknesses. Some looked figured and others more plain.
JLH
RE: WANTED: Small walnut slab for leg vise chop - T.J. - 05-29-2017
I'll get the length/width for you, but price expectation would be market rate in board feet.
RE: WANTED: Small walnut slab for leg vise chop - T.J. - 05-29-2017
I'll need a final dimension of 9" wide, 34-3/4" tall and 2-1/2" thick.
RE: WANTED: Small walnut slab for leg vise chop - David Knight - 05-29-2017
Where are you located? I'm in Cleveland, Ohio and have a couple pieces that would work.
RE: WANTED: Small walnut slab for leg vise chop - museumguy - 05-29-2017
I may have some if the other sources don't work out. I'm in Maryland.
RE: WANTED: Small walnut slab for leg vise chop - T.J. - 06-02-2017
I'm in Arkansas. Zip 72120
Do you gentlemen mind posting a few photos of what you have?
RE: WANTED: Small walnut slab for leg vise chop - museumguy - 06-03-2017
(06-02-2017, 07:56 PM)T.J. Wrote: I'm in Arkansas. Zip 72120
Do you gentlemen mind posting a few photos of what you have?
I lan on being in the shop later today. I will get some pics and post them this evening.
RE: WANTED: Small walnut slab for leg vise chop - T.J. - 06-03-2017
(06-03-2017, 07:49 AM)museumguy Wrote: I lan on being in the shop later today. I will get some pics and post them this evening.
Ok, thanks!
RE: WANTED: Small walnut slab for leg vise chop - museumguy - 06-03-2017
The piece that I have is in the rough, 3" thick x 7" wide x 76" long.