Woodnet Forums
Paper for Drum Sander - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Paper for Drum Sander (/showthread.php?tid=7331051)

Pages: 1 2


Paper for Drum Sander - David G - 06-17-2017

Any recommendations for drum sander paper?  I have worked through the excess rolls for the Supermax 19-38.  Are there "good" and "poor" sandpaper rolls or is this a generic "everything works" item?


RE: Paper for Drum Sander - SceneryMaker - 06-17-2017

I get mine at Klingspor (http://www.woodworkingshop.com/abrasive-rolls/)


RE: Paper for Drum Sander - EdL - 06-17-2017

I use Mirka on my Woodmaster, has a good life, when it starts to load up, I'll change it, then powerwash to clean it, dry & re-use.

Ed


RE: Paper for Drum Sander - BloomingtonMike - 06-18-2017

Ed whats the secret to pressure wash it? Clamp the strips?I use those blocks of rubber to clean them on the roll.

My last order was from Econabrasives but I want to try Mirka next time. I love abranet/autonet discs.


RE: Paper for Drum Sander - CARYinWA - 06-18-2017

Industrial Abrasive


RE: Paper for Drum Sander - jteneyck - 06-18-2017

I've found Klingspore products to work best and last the longest on my Delta drum sander.  And you want cloth, not paper. 

John


RE: Paper for Drum Sander - Steve N - 06-18-2017

I'm really partial to the X weight Aluminum Oxide rolls found at the bottom of this page 50 yards of material for 55 or 60 bux a roll makes a lot of changes, and I've found this paper to outlast the stuff from Klingspor at least 1 1/2 x to 1, usually 2 to 1. Make absolutely sure to pick the X weight, don't go for the lower priced stuff. To tell the truth I've been so happy with the AO, I've never tried the Zirconia stuff.

I have a SuperMax 19/38, and over the stuff they market for up to 10 times the price it is far superior. Of course you have to cut your own lengths off the roll, but you could have a child do that part.


RE: Paper for Drum Sander - Arlin Eastman - 06-18-2017

(06-17-2017, 08:30 PM)SceneryMaker Wrote: I get mine at Klingspor (http://www.woodworkingshop.com/abrasive-rolls/)

+1


RE: Paper for Drum Sander - EdL - 06-18-2017

(06-18-2017, 07:04 AM)BloomingtonMike Wrote: Ed whats the secret to pressure wash it? Clamp the strips?I use those blocks of rubber to clean them on the roll.

My last order was from Econabrasives but I want to try Mirka next time. I love abranet/autonet discs.

I just lay them out on the concrete, put my foot on the end. Once it gets wet, it'll stay there.

Ed


RE: Paper for Drum Sander - rwe2156 - 06-21-2017

I've been pretty happy with the products from Industrial Abrasives.